Antenna Cables & Connectors

The original the best and the most copied antennas in Australia

Designing and Manufacturing Antennas since 1973  Information 


1     ul12c
UL4C

  UHF Antenna Base + 4mtrs coax
+ Pl259 Connector


UL4C

UHF Antenna Base + 4mtrs RG58CU coax + PL259 Connector
Suit antennas UHF CB & Antennas 3MHz to 600MHz.

 

Available with Any Length and any Connector

2     ul12 / c
UL4 / C

UHF Antenna Base + 4mtrs coax
+ Pl259 Connector



UL4/C

UHF Antenna Base + 4mtrs RG58CU coax + PL259 Connector not attached
Suit antennas UHF CB & Antennas 3MHz to 600MHz.
The connector is NOT attached to the cable


Available with Any Length and any Connector

3    ul12bnc
UL4BNC

UHF Antenna Base + 4mtrs coax
+ BNC Male Connector

UL4BNC

UHF Antenna Base + 4mtrs RG58CU coax + BNC Connector
Suit antennas UHF CB & Antennas 3MHz to 600MHz.


Available with Any Length and any Connector

5    soc12c
SOC4C 

SO239 UHF Antenna Base + 4mtrs coax
+ PL259 Connector


SOC4C

SO239 UHF Antenna Base with 4mtrs RG58CU coax and a PL259 Connector Suit antennas UHF CB & Antennas 3MHz to 600MHz.

PLEASE NOTE: The SOC239 is a very strong fitting if fitted correctly
1. Remove both the collar AND the hex nut of the SOC then put the SOC on the bull bar first THEN the hex nut then the collar

2. If you need to expand the hole make sure that it is not too loose, I has to be a tight fit for the added strength

 

Available with Any Length and any Connector


6   c12c
C3.6C

Extension Cable
RG58CU coax with a Pl259 connector
attached on each end


C3.6C

RG58CU coax with a Pl259 connector attached on both ends
Suit antennas UHF & HF CB & Antennas 4MHz to 600MHz.

    Code  Length  
  C3.6C    3.6m  
  C4C    4.0m  
  C5C    5.0m  
  C7.3C    7.3m  
  
C10C    10.m  
  C11C    11.m  


Available with Any Length and any Connector


7   dm12c
DM3.6CK

Dipole Base + 3.6mtrs RG58CU Coax
+ a pl259 connector


DM3.6CK

Dipole Base with 3.6mtrs of RG58CU Coax and a pl259 connector
The dipole base is double 5/16" Base to suit two antennas
one top one bottom

Suit antennas UHF & HF 27MHz CB & Antennas 4MHz to 600MHz.

     Code  Length  
   DM3.6CK   3.6m   
  DM5CK   5.0m   
   DM7.3CK   7.3m   
   DM11CK   11.m   


Available with Any Length and any Connector


8    mag12bnc
MAG3.6BNC

Magnetic base + 3.6mtrs RG58CU Coax
+ BNC male connector


MAG3.6BNC

Magnetic Base with 3.6mtrs of RG58CU Coax and a BNC male connector
The magnetic base is 5/16" Base to suit most monopole antennas
Suit antennas UHF & HF 27MHz CB & Antennas 4MHz to 600MHz.

 

Note: The diameter of the Magnetic base is 90mm

  Code  Length  
MAG3.6BNC    3.6m  
MAG5BNC    5.0m  
MAG7.3BNC    7.3m  
MAG11BNC    11.m  

Available with Any Length and any Connector

Magnet Mounts are not always a good choice for vehicles
as they could damage the paint work if you are not careful!

 

9   mhrbsoc
MAG3.6C 

Magnetic base + 3.6mtrs RG58CU Coax
+ PL259 connector


MAG3.6C

Magnetic Base with 3.6mtrs of RG58CU Coax + PL259 connector
The magnetic base is 5/16" Base to suit most monopole antennas
Suit antennas UHF & HF 27MHz CB & Antennas 4MHz to 900MHz.

Note: The diameter of the Magnetic base is 90mm

  Code  Length  
MAG3.6C    3.6m  
MAG5C    5.0m  
 MAG5.3C    7.3m  

MAG11C    11.m  

Available with Any Length and any Connector

Magnet Mounts are not always a good choice for vehicles
as they could damage the paint work if you are not careful!


10   mhrbsoc
MHRB4SOC 

Magnetic base + 4mtrs RG58CU Coax
+ SO239 connector


MAG4SOC

SO239 Magnetic Base with 3.6mtrs of RG58CU Coax + PL259 connector
Suit antennas UHF & HF 27MHz CB & Antennas 4MHz to 960MHz.
The MHRB3.6SOC can be made with any type of connector
any length of cable.

Note: The diameter of the Magnetic base is 90mm

  Code  Length  
MHRB3.6C    3.6m  
MHRB5C    5.0m  
 MHRB7.3C    7.3m  

MHRB11C    11.m  

Available with Any Length and any Connector

Magnet Mounts are not always a good choice for vehicles
as they could damage the paint work if you are not careful!


Solder Type Connectors & Adapters
soc pl259 pl259
M1 Code   M1 Code   M1 Code  
SOC
PL259
PLA
SOC solder type connector to suit RG58 50 Ohm coax cable PL259 solder type connector to suit
RG58 50 Ohm coax cable
Adapter to change SO239 to 5/16" standard antenna thread

Crimp Type Connectors   (you will need a crimping tool)
bnccrimp bnccrimp sma
M1 Code   M1 Code   M1 Code  
BNC-M58
TNC-M58
SMA-M58
BNC Male crimp type connector to suit
RG58 50 Ohm coax cable
TNC Male crimp type connector to suit
RG58 50 Ohm coax cable
SMA Male crimp type connector to suit
RG58 50 Ohm coax cable