Marine Bands Antennas

Designing and Manufacturing Antennas since 1973  Information 
 

For Aluminum Boats & Vehicles 27.880MHz ~ 28.240MHz HF Antenna 

 

DX160MARdx170mar

Length
1520mm

The DX160MAR is a 27.880MHz antenna designed for use on metal hull boats, where the antenna can use the metal hull as its ground plane!


The DX160MAR is covered with polyolefin and has a chrome plated 5/16" 26tpi Base
The DX160MAR is the best 27MHz marine antenna as it is long, light and very broadband.

Available in a White or Black Polyolefin (Rubber) Coating.

Recommended Accessories - UB3.6PL with BMB or Mag3.6PL

Price $69.00 + Pack & Post $19.00

 
DX170MAR  dx170mar
Length
1790mm

70" Dip Coated with Epoxy Resin on a light Duty Tappered Hollow Rod

The DX170MAR is covered with polyolefin and has a chrome plated 5/16" 26tpi Base
Available in a White or Black Polyolefin (Rubber) Coating.

(Recommended BASE BSS or SAM with RA Adapter)

 

Price $79.00 + Pack & Post $26.00

Mobile 1/4 Wave 156 ~ 163MHz Monopole Antennas

M156-1
Length
500mm

M156-1 A robust 7mm thick antenna made with copper braid to ensure the widest possible bandwith and covered with polyolefin (Rubber) Coating

As these antennas are all 1/4 wave for the VHF Marine band they need to be mounted so that the bottom of the antenna is as close to the surface of the metal ground plane as possible

NOTE: This antenna should be tested, and tuned in situ as all ground planes and locations on boats can vary greatly

NOTE: Do not use a spring, If you have to, then you will need to retune the antenna

 

Recommended Accessories - UB3.6BNC or UB3.6PL with BMB or Mag3.6PL

Price $39.00 + Pack & Post $16.00

 
S156-1 sw2
Length
600mm

S156-1 A stainless steel 1/4 Wave VHF Marine antenna

As these antennas are all 1/4 wave for the VHF Marine band they need to be mounted so that the bottom of the antenna is as close to the surface of the metal ground plane as possible

NOTE: This antenna should be tested, and tuned in situ as all ground planes and locations on boats can vary greatly

NOTE: Do not use a spring, If you have to, then you will need to retune the antenna

 

Recommended Accessories - UB3.6BNC or UB3.6PL with BMB or Mag3.6PL

Price $29.00 + Pack & Post $16.00

 
WPS156  swp
Length
600mm

Stainless steel 1/4 wave antenna suitable for 2m band and high band VHF applications tunable from 108MHz.


The WPS144 comes with a "UB5PL" 5m long Base and Cable

NOTE: This antenna should be tested, and tuned in situ as all ground planes and locations on boats can vary greatly

Price $59.00 + Pack & Post $19.00

 
WPM156  
Length
500mm

A robust 7mm thick antenna made with copper braid to ensure the widest possible bandwith and covered with polyolefin (Rubber)

The WPM144 comes with a "UB5PL" 5m long Base and Cable

NOTE: This antenna should be tested, and tuned in situ as all ground planes and locations on boats can vary greatly

Price $69.00 + Pack & Post $19.00

 
M156-3  m156-3
Length
1280mm

Gain
4dBi

The M156-3 is a 156 to 162MHz antenna designed for use on metal hull boats, where the antenna can use the metal hull as its ground plane!


This antenna although factory tuned should always be SWR checked and if needed, fine tuned

Recommended Accessories -
UB3.6PL with BMB or Mag3.6PL

Price $69.00 + Pack & Post $19.00

 

 CDB156 - VHF Marine Band - Base Antenna    
 

Length
1450mm


Gain
3dBi

The CDB156 is a Ground  Inderpendant Coaxial Dipole with 3dbi gain. Providing a broad feed angle and low VSWR across the whole VHF Marine Band

This product is most suitable for Base Station or Marine Mounting situations.
The antenna is  supplied with a 500 mm Coaxial pigtail with a FME Male Connector.

A stainless steel 20 mm base tube is provided for mast mounting using worm drive clamps or u bolts.
VSWR = <1.5:1 from 156 - 162 Mhz 

Feed cables of various lengths can be made to suit any feed situation or radio connector types.

Price $185.00 + Pack & Post $26.00

Connectors, Clamps, and Cables to suit the above base Antennas

N5FME

5 Mtrs Cellfoil Coax with N Male and FME Female Connector

Price $30.00

N10FME

10 Mtrs Cellfoil Coax with N Male and FME Female Connector

Price $45.00

N15FME

15 Mtrs Cellfoil Coax with N Male and FME Female Connector

Price $60.00

N20FME

20 Mtrs Cellfoil Coax with N Male and FME Female Connector

Price $75.00

PLFME

Adapter to change FME Female Connector to PL259 Connector

Price $9.00

BNCFME

Adapter to change FME Female Connector to BNC Male Connector

Price $9.00

MK1

Ubolts x 2 - C5 type for mast mounting

Price $9.00

MK2

Worm drive clamps - Stainless Steel for mast mounting

Price $9.00

WPST

Water/Proof Sealing Tape - for Antenna Connector @ 75mm

Price $5.00

We can also special length cables with whatever connectors you may require!