All Mobileone Hand Held antennas are made within strict design specifications,

They are made by hand and individually tuned to ensure the best possible SWR.

 
Our Hand Held Radio antennas are very broadband, and can also be used effectivly on scanners.
 
BNCMD bncmd
Length
160mm
Gain
Unity

For BNC Connection, The BNCMD is a 1/4 wave antenna for use on the 477MHz UHF CB band, it is made with tough nylon tubing covered entirely with polyolefin for heavy duty use and weatherproof protection.
This antenna is made primarily for hand held transceivers and has a very large bandwidth making it an excellent choice.

Price $35.00 + Pack & Post $12.00

 
BNCHW bnchw
Length
350mm
Gain
3dBi

For BNC Connection, The BNCHW is a 1/2 wave antenna for use on the 477MHz UHF CB band, it is made with tough nylon tubing covered entirely with polyolefin for heavy duty use and weatherproof protection.
This antenna has the highest possible gain of 3dBi for its length (the only way to have higher gain is for a longer antenna)
This antenna is made primarily for hand held transceivers and has a very large bandwidth making it an excellent choice.

Additional products:
‘HW’ series with ‘N’ type of ‘PL259’ termination are also available.

Price $59.00 + Pack & Post $12.00

 
TNCMD tncmd477
Length
160mm
Gain
Unity

For TNC Connection, The TNCMD is a 1/4 wave antenna for use on the 477MHz UHF CB band, it is made with tough nylon tubing covered entirely with polyolefin for heavy duty use and weatherproof protection.
This antenna is made primarily for hand held transceivers and has a very large bandwidth making it an excellent choice.

Price $35.00 + Pack & Post $12.00

 
TNCHW tnchw
Length
350mm
Gain
3dBi

For TNC Connection, The BNCHW is a 1/2 wave antenna for use on the 477MHz UHF CB band, it is made with tough nylon tubing covered entirely with polyolefin for heavy duty use and weatherproof protection.
This antenna has the highest possible gain of 3dBi for its length (the only way to have higher gain is for a longer antenna)
This antenna is made primarily for hand held transceivers and has a very large bandwidth making it an excellent choice.

Additional products:
‘HW’ series with ‘N’ type of ‘PL259’ termination are also available.

Price $59.00 + Pack & Post $12.00

 
SMAHW
Length
350mm

Gain

3dBi
The SMAHW is for radios where the SMA antenna connector is extended from the case of the radio.

For SMA Connection, 1/2 wave ground independent antenna with a SMA connector designed especially for exposed SMA connectors on hand held radios. Covered entirely with polyolefin for heavy duty use and weatherproof protection.

Additional products:
‘HW’ series with ‘N’ type of ‘PL259’ termination are also available.

Note: The SMAHW477 has a diameter of 12mm at its base and may not fit some radios that have the SMA connector recessed into the radio. If this is the case then the SMAIHW477 is the better choice.

Price $59.00 + Pack & Post $12.00

 
SMAIHW
Length
350mm

Gain
3dBi
The SMAIHW is for radios where the SMA antenna connector is recessed into the case of the radio.

For SMA Connection, 1/2 wave ground independent antenna designed especially for exposed SMA connectors on hand held radios.

Covered entirely with polyolefin for heavy duty use and weatherproof protection.

Additional products:
‘HW’ series with ‘N’ type of ‘PL259’ termination are also available.

Note: The SMAIHW477 will fit all hand held radios and scanners that have a SMA connection.
|

Price $59.00 + Pack & Post $12.00

smaihw     The above graph is a actual VSWR of a SMAIHW antenna with the antenna directly on the Wiltron S112
   as all of the hand held radio antennas have the same internal design, it is safe to assume this graph for all types