HF Ham Radio Bands Antennas & Accessories

Australian Designed and Manufactured Mono-Band Helicals.

Mobile One has been supporting Ham radio in Australia since we started making antennas in 1973 and we will continue to make
antennas and accessories for as many Ham bands that are required from the 80 metre band up to 70cm band.

 

These Antennas are very robust and heavy, they require to be mounted onto a secure mounting such as a Bull Bar or equivalent

The Hamtenna is made so that the windings are tight but have a tiny gap between each coil, this makes an antenna with a very low SWR but also give the antenna a wider bandwidth with a greater power rating, this means that when pushing 100's of watts through the antenna there is less chance of a hot spot burning the antenna out.

Power Rating The Hamtenna should easily cope with whatever power you put through it, as long as it is properly tuned to the frequency that you are using. Love your feedback!

 

Hamtenna Range of Ham-Band Antennas - All have a 1/2" BSW base fitting   
M160-1AS

Base Size 1/2" BSW

Length 1800mm

Frequency 1.8MHz to 1.88MHz

Bandwidth 40kHz < 1.5:1 SWR

Power Rating 300Watts

The M160-1AS is a heavy duty solid fiberglass antenna that is 13mm thick and wound with .315 mm enameled wire, wound in such a way that the indivudual turns are spaced that they do not touch each other and so still providing a very low SWR but a much wider bandwidth and a much higher power rating of around 300Watts +

The M160-1AS can be easily tuned anywhere around the 1.8MHz band and with longer steel rods even lower

The M160-1AS can be used as a dipole on a mast with SAM base and another M160-1AS

Price $180.00 + Pack & Post $16.00

 
M80-1AS

Base Size 1/2" BSW

Length 1800mm

Frequency 3.5 to 3.80MHz

Bandwidth 90kHz < 1.5:1 SWR

Power Rating 300Watts

The M80-1AS is a heavy duty solid fiberglass antenna that is 13mm thick and wound with .315 mm enameled wire, wound in such a way that the indivudual turns are spaced that they do not touch each other and so still providing a very low SWR but a much wider bandwidth and a much higher power rating of around 300Watts +

The M80-1AS can be easily tuned anywhere around the 3.5MHz band and with longer steel rods even lower

The M80-1AS can be used as a dipole on a mast with SAM base and another M80-1AS

Price $160.00 + Pack & Post $16.00

 
M40-1AS

Base Size 1/2" BSW

Length 1800mm

Frequency 7 to 7.40MHz

Bandwidth 160kHz < 1.5:1 SWR

Power Rating 300Watts

The M40-1AS is a heavy duty solid fiberglass antenna that is 13mm thick and wound with .315 mm enameled wire, wound in such a way that the indivudual turns are spaced that they do not touch each other and so still providing a very low SWR but a much wider bandwidth and a much higher power rating of around 300Watts +

The M40-1AS can be easily tuned anywhere around the 7MHz band and with longer steel rods even lower

The M40-1AS can be used as a dipole on a mast with SAM base and another M40-1AS

Price $144.00 + Pack & Post $16.00

 
M30-1AS

Base Size 1/2" BSW

Length 1800mm

Frequency 10 to 10.30MHz

Bandwidth 250kHz < 1.5:1 SWR

Power Rating 300Watts

The M30-1AS is a heavy duty solid fiberglass antenna that is 13mm thick and wound with .560 mm enameled wire, wound in such a way that the indivudual turns are spaced that they do not touch each other and so still providing a very low SWR but a much wider bandwidth and a much higher power rating of around 300Watts +

The M30-1AS can be easily tuned anywhere around the 10MHz band and with longer steel rods even lower

The M30-1AS can be used as a dipole on a mast with SAM base and another M30-1AS

Price $120.00 + Pack & Post $16.00

 
M20-1AS

Base Size 1/2" BSW

Length 1400mm

Frequency 14 to 14.40MHz

Bandwidth 320kHz < 1.5:1 SWR

Power Rating 400Watts

The M20-1AS is a heavy duty solid fiberglass antenna that is 13mm thick and wound with .560 mm enameled wire, wound in such a way that the indivudual turns are spaced that they do not touch each other and so still providing a very low SWR but a much wider bandwidth and a much higher power rating of around 300Watts +

The M20-1AS can be easily tuned anywhere around the 14MHz band and with longer steel rods even lower

The M20-1AS can be used as a dipole on a mast with SAM base and another M20-1AS

Price $119.00 + Pack & Post $16.00

 
M15-1AS

Base Size 1/2" BSW

Length 1400mm

Frequency 21 to 21.50MHz

Bandwidth 490kHz < 1.5:1 SWR

Power Rating 400Watts

The M15-1AS is a heavy duty solid fiberglass antenna that is 13mm thick and wound with .710 mm enameled wire, wound in such a way that the indivudual turns are spaced that they do not touch each other and so still providing a very low SWR but a much wider bandwidth and a much higher power rating of around 300Watts +

The M15-1AS can be easily tuned anywhere around the 21MHz band and with longer steel rods even lower

The M15-1AS can be used as a dipole on a mast with SAM base and another M15-1AS

Price $119.00 + Pack & Post $16.00

 

Mounting Options for Hamtennas

 

sam

 

SAM SAMS SS SSL SSU BBB4 45mm BBB5 50mm BBB6 63mm
Price $66.00 Price $59.00 Price $66.00 Price $60.00 Price $89.00 Price $39.00 Price $39.00 Price $39.00

 

Mounting Options for Mast mounting

RASAM 1/2" Vertical mounting to suit SAM + SAMS Mounts Right angle mounting for SAM Mount. Suitable for top mast mounting of single antenna (6 mm thick powder coated heavy duty aluminium with ‘U’ bolts) $19.00
DMSAM
1/2"
Horizontal Mounting for SAM Mount only. Suitable for top mast mounting of 2 x antennas in a Dipole configuration (see Below) (6 mm thick powder coated heavy duty aluminium with ‘U’ bolts) $15.00

 

A Simple Base Station Solution


M80DIP

Shown above is the 80 meter band version of the HF Dipole antnna

Code Frequency
Length
Mount Description
M15DIP 21~21.5MHz 2860mm
SAM

The idea is simple, just take two HF antennas any frequency as long as they are the same and mount them as a dipole, by doing this you make an antenna that occupies a lot less space and has gain 2dB greater than a single monopole antenna mounted onto a flat ground plane, The antenna can be mounted either vertical or horizontal

Warning this antenna is very heavy

1. This antenna is not supplied with any mounting hardware

2. This antenna is supplied with extra various length tuning rods

3. We can supply tuned to whatever frequency required but you will need to fine tune it

4. This antenna is made to order and may take up to four weeks to manufacture

M20DIP 14~14.4MHz 2860mm SAM
M30DIP 10~10.3MHz 3660mm SAM
M40DIP 7~7.3MHz 3660mm SAM
M80DIP 3.5~3.8MHz 3660mm SAM
M160DIP 1.8~1.875MHz 3660mm SAM