UHF 477MHz CB Base Station Antennas

The original the best and the most copied antennas in Australia

Suitable for all locations both Land and Sea!

Mobile One UHF Base antennas are made with thick walled fiberglass and with a 22mm wide stainless steel mounting tube.

 

col3

Specifications

Order Code .... COL3

Type .......... Base Antenna

Pattern ....... Omnidirectional

Total Length .. 1000mm

Total Weight .. 350grams

Base Width .... 22.3mm

Base Length ... 280mm

Impedance ..... 50Ω

Tuning ........ Factory preset

Frequency ..... 472MHz ~ 482MHz

Gain .......... 3dBd ~ 5dBi

VSWR .......... < 1.5:1 over 8MHz

Max Power ..... 200Watts

Connector ..... FME with Adapter

The above specifications represent the maximum

performance when the antenna is in its best position

COL3

With a 22mm Diameter Mounting Tube

 

The COL3 is a 3dBd / 5dBi gain collinear UHF antenna base antenna

Supplied with 10 metres of RG58 low loss coax cable that is terminated to a FME connector

Supplied with adaptor of your choice such as ‘N’ type / BNC / TNC / PL259

Supplied with mounting clamps

Recommended Accessories - Antenna Mast

 

 

 

 

 


col6

Specifications

Order Code .... COL6

Type .......... Base Antenna

Pattern ....... Omnidirectional

Total Length .. 2090mm or 6' 10"

Total Weight .. 550grams

Base Width .... 22.3mm

Base Length ... 280mm

Impedance ..... 50Ω

Tuning ........ Factory preset

Frequency ..... 472MHz ~ 482MHz

Gain .......... 6dBi

VSWR .......... < 1.5:1 over 10MHz

Max Power ..... 200Watts

Connector ..... N Female

The above specifications represent the maximum

performance when the antenna is in its best position

COL6

With a 22mm Diameter Stainless Steel Mounting Tube

The COL6 is a 6dBi gain collinear UHF antenna base antenna that is designed for maximum range in all base installations regardless of terrain, however, the antenna will perform best when placed on a high tower, the higher the tower, the better the performance.


The COL6 is made with the finest Australian fiberglass and stainless steel that is perfect for a marine environment or mounting onto boats.

Recommended Accessories - Antenna Mast


col9

Specifications

Order Code .... COL9

Type .......... Base Antenna

Pattern ....... Omnidirectional

Total Length .. 2360mm or 7' 6"

Total Weight .. 590grams

Base Width .... 22.3mm

Base Length ... 280mm

Impedance ..... 50Ω

Tuning ........ Factory preset

Frequency ..... 473MHz ~ 482MHz

Gain .......... 9dBi

VSWR .......... < 1.5:1 over 8MHz

Max Power ..... 200Watts

Connector ..... N Female

The above specifications represent the maximum

performance when the antenna is in its best position

COL9

With a 22mm Diameter Stainless Steel Mounting Tube

The COL9 is a 9dBi gain collinear UHF antenna base antenna that is designed for maximum range in all base installations, however, the antenna will need to be placed on a high tower, the higher the tower, the better the performance as the COL9 has a low angle radiation pattern.


The COL9 is made with the finest Australian fiberglass and stainless steel that is perfect for a marine environment.

Recommended Accessories - Antenna Mast