Raised Feed UHF 477MHz CB Antennas

Raised feed Antennas have their own ground plane, this means they can be mounted on any surface, anywhere!

UHF Raised feed antennas are dipole antennas that combine a standard UHF antenna with a 1/4 wave tube, this combination amplifies the gain of the individual ANTENNA TOP by further lowering its radiation pattern. Raised feed antennas have the highest gain for the shortest length of any antenna

 
Length
225mm

Weight 250
Grams

Mount
1/2" UNF

 

RF470S

The RF470S is a dipole antenna commonly known as a "Raised Feed".
The RF470S is the most popular of all UHF CB antennas due to its high gain and short length.
The RF470S is almost indestructible as it has no soldered internals that can breakbut rather is modular made up of parts that fit together and all are replaceable.

The RF470S has a solid Stainless Steel 1/4 wave tube that is its own tuned ground plane, so it is not needed to be earthed in any way and also allows the
antenna to be placed in almost any location.

It is usually supplied with 4.3 metres of excellent quality RG58cu coax, which is enough to mount in any location on a vehicle, and is supplied with a
PL259 solder type connector.

The RF470S has a inbuilt light duty spring to absorb the vibration from moving vehicles and is ideal for bull bar mounting on petrol vehicles.

One of the key features of the RF470S is the ability of using a large range of different antenna tops allowing for different colours, lengths and gains.

 

Base Section only without Antenna Top Price $95.00 + Pack & Post $16.00
 
Length
300mm

Weight 430
Grams

Mount
PL259
to Suit SO239

CP470S

The CP470S is a UHF dipole antenna with stainless steel spring and a heavy duty fiberglass antenna top commonly known as a "Raised Feed".

The CP470S is almost indestructible as it has no soldered internals that can breakbut rather is modular made up of parts that fit together and all are replaceable.

The CP470S has a solid Stainless Steel 1/4 wave tube that is its own tuned ground plane so it is not needed to be earthed in any way and also allows the
antenna to be placed in almost any location.  

The CP470S has a pl259 connection removable heavy duty spring base to absorb the vibration from moving vehicles and is ideal for bull bar mounting.

One of the key features of the CP470S is the ability of using a large range of different antenna tops allowing for different colours, lengths and gains.


Base Section only without Antenna Top Price $139.00 + Pack & Post $16.00

Code Antenna Tops for the RF470S and CP470S Gain Antenna Top Description Price
FW470

1.2dBi

Flexable 1/4Wave Antenna makes for a perfect Dipole

$24.00
SW470

1.3dBi

Stainless Steel 1/4 Wave Antenna makes for a perfect Dipole

$19.00
S474B

6dBi

Stainless Steel Colinear Antenna makes 6dBi high Gain

$39.00
M474

6dBi

Fibreglass Colinear makes a broad band 6dBi Gain

$39.00
M474HD

6dBi

Thick Fibreglass Colinear makes a broader band 6dBi Gain

$49.00
M475HD 7dBi

Thick Fibreglass Colinear makes a broader band 7dBi Gain

$59.00
 
car bmb     bmb

BMB

For Bonnet Mounting -
If you intend to mount this antenna on the bonnet or on the boot of a vehicle then you may find the Mobile One BMB mount to be an excellent choice, See image on the left. The BMB simply slides onto the side or your bonnet and then is held in place by two small grub screws, The BMB is the best bonnet mount for all two way radio, Scanner and AM/FM radio as it places the antenna close to the bonnet, this produces an excellent SWR where transmitting antennas are concerned and an excellent impedance where receiving antennas are concerned,

The BMB is strong enough to take antennas up to 2mtrs long.

However the BMB does not fit all vehicles, in this case a Z-Bracket can be used

Price $49.00