All Other Antennas

If you are needing that special antenna that does not yet exist please phone us
All of the antennas below are made with Australian Fibreglass and fittings - please support Australian Made
70MHz to 88MHz 150MHz to 210MHz 400MHz to 476MHz 530MHz to 2.4gHz

525kHz to 2MHz
(See Radio AM/FM Antennas Section)

2MHz to 25MHz
See Ham Band antenna section for more ideas

Mobile One Make shortwave & low frequency HF antennas on 6MHz, 8MHz, 10MHz etc, either with 5/16" or 1/2" fittings
but we don't make multi tap or multi frequency HF antennas. Please Ask.

26MHz to 27MHz

New Zealand HF CB Radio Band 26.330MHz to 26.770MHz

Code	DSE	Length	Description	Price
RDRMNZ	D4063	320mm	Fibreglass former & Loading coil with flexible spring, top coated with black polyolefin. This antenna is factory tuned to 26.400MHz but is very narrow banded and will need fine tuning or testing Recommended Accessories - A12C, or UL12C with BMS or Mag12C Note: You can use a spring SAL or SAO but the antenna will need to be re-tuned on the spring.	$25.00

Code	DSE	Length	Description	Price
DX136FWN	D4061	910mm	Fibreglass helical constant diameter 5mm thick with 5/16" fitting coated with PVC available in black. This antenna is factory tuned to 26.400MHz (may need fine tuning) Recommended Accessories - A12C, or UL12C with BMS or Mag12C, You can use a SAL or SAO spring.	$23.00

Code	DSE	Length	Description	Price
DX160CDN	D4060	1520mm	Fibreglass helical constant diameter 6.5mm thick with 5/16" fitting coated with PVC available in black. This antenna is factory tuned to 26.400MHz and should not need any further tuning. Recommended Accessories - A12C, or UL12C with BMS or Mag12C , You can use a SAL or SAO spring.	$35.00

Code	Length	Description	Price
DX148ATN	1190mm	Special made Long 1/4" thick constant tapped fibreglass antenna cut to tune but factory set to 27.125MHz with a 3/8" male fitting designed specialy for American and Japanese bases Recommended Accessories - FA with A12C, or UL12C with BMS or Mag12C	$60.00

27MHz to 28MHz
(See Australian 27MHz HF CB Antennas)

Mobile One Make a huge range of CB antennas

28MHz to 29MHz marine
(see Marine antenna section)

Mobile One Make a range of antennas for marine frequencies

28MHz to 30MHz
(see Ham antenna section)

Mobile One Make a range of antennas for the 10m Ham Band
NOTE: Almost all 27MHz CB Antennas are available pre tuned fo 10m band

30MHz to 69MHz

6m Ham band , Baby monitors, cordless phone & remote control systems

BNCRDVAR

TNCRDVAR

Code	Length	Description	Price
BNCRDVAR	190mm	BNC Connection, 1/4 wave Helical covered with polyolefin rubber This antenna is available for frequencies ranging from 30MHz to 88MHz state the tx frequency range you require ƒ	$40.00
TNCRDVAR	190mm	TNC Connection, 1/4 wave Helical covered with polyolefin rubber This antenna is available for frequencies ranging from 30MHz to 88MHz state the tx frequency range you require ƒ	$40.00

Code	Length	Description	Price
FH35	1220mm	Fibreglass helical constant diameter 6.5mm thick with 5/16" fitting coated with PVC available in black or white This antenna style is available for any frequency from 30MHz to 41MHz state the tx frequency range you require ƒ Recommended Accessories - A12C, or UL12C with BMS or Mag12C, You can use a SAL or SAO spring.	$30.00

Code	Length	Description	Price
M6-1	1520mm	Fibreglass 1/4 wave tapered from 6.5mm to 4mm with 5/16" fitting coated with polyolefin black or white This antenna is tune able from 50MHz to 88MHz Recommended Accessories - A12C, or UL12C with BMS or Mag12C. Note: You can use a spring SAL or SAO but the antenna may need to be re-tuned on the spring	$45.00

70MHz to 88MHz top

Low band VHF - some country fire, ambulance, police & taxi

BNCVAR

TNCVAR

SMAVAR

Code	Length	Description	Price
BNCVAR	280mm	1/4 wave Helical covered with polyolefin rubber on a BNC Connector The BNCVAR has a bandwidth of 1Mhz < 1.5:1 SWR when tuned to the required frequency and is available from 70MHz to 200MHz, simply state the frequency required at the end of the code eg: BNCVAR77	$35.00
TNCVAR	280mm	1/4 wave Helical covered with polyolefin rubber on a BNC Connector The TNCVAR has a bandwidth of 1Mhz < 1.5:1 SWR when tuned to the required frequency and is available from 70MHz to 200MHz, simply state the frequency required at the end of the code eg: TNCVAR77	$35.00
SMAVAR	280mm	1/4 wave Helical covered with polyolefin rubber on a BNC Connector The SMAVAR has a bandwidth of 1Mhz < 1.5:1 SWR when tuned to the required frequency and is available from 70MHz to 200MHz, simply state the frequency required at the end of the code eg: SMAVAR77 NOTE: The diameter of the base of the SMA is 12mm It may not fit your application please ask if in doubt.	$45.00

Code	Length	Description	Price
RDRMVAR	320mm	Fibreglass former & Loading coil with flexible spring, top coated with black polyolefin. This antenna is available for frequencies from 26MHz to 88MHz state the tx frequency range required ƒ Recommended Accessories - UL12C with BMS or Mag12C. Note: You can use a spring SAL or SAO but the antenna will need to be re-tuned on the spring	$25.00

Code	Length	Description	Price
SW1	980mm	Stainless steel 1/4 wave 3mm thick constant diameter with 5/16" fitting This antenna is tunable from 69MHz to 88MHz and can be supplied tuned to the frequency required Recommended Accessories - A12C, or UL12C with BMS or Mag12C. Note: You can use a spring SAL or SAO but the antenna will need to be re-tuned on the spring	$35.00

Code	Length	Description	Price
M70-1	960mm	Fibreglass 1/4 wave 5mm thick constant diameter with 5/16" fitting coated with PVC black or white This antenna is tunable from 69MHz to 88MHz and can be supplied tuned to the frequency required Recommended Accessories - A12C, or UL12C with BMS or Mag12C. Note: You can use a spring SAL or SAO but the antenna will need to be re-tuned on the spring	$30.00

Code	Length	Gain	Description	Price
M70-2	1520mm	2.14dB	Fibreglass 1/2 wave tapered from 6.5mm to 4mm with 5/16" fitting coated with PVC black This antenna is tunable from 69MHz and can be supplied tuned to the frequency required Recommended Accessories - A12C, or UL12C with BMS or Mag12C. Note: You can use a spring SAL or SAO but the antenna will need to be re-tuned on the spring	$30.00

Base Station Antenna 70MHz to 88MHz

Code	Length	Gain	Description	Price
COL77H	2700mm	3dB	Ground independent base antenna with a 20mm thick aluminium tube base section for mounting onto a mast or a J pole, this antenna is available for frequencies ranging from 70MHz to 88MHz and is usually supplied with 10mtrs of RG58 Coax and a pl259 connector not terminated to the coax. NOTE: This antenna can be supplied with whatever coax and connectors required.	ASK

88MHz to 108MHz
(see Broadcast antenna section)

Mobile One make a large range of FM radio antennas

108MHz to 136MHz
(see Air band antenna section)

Mobile One make a large range of air band antennas

136MHz to 149MHz
(see Amateur Bands section)

Mobile One make a large range of Ham Band antennas

150MHz to 155MHz top

VHF HI Band Commercial + Digital Radio & TV Frequencies

The antennas below are made for various frequencies ranging from 150MHz to 210MHz

BNCMD

TNCMD

SMAMD

Code	Length	Description	Price
BNCMD	350mm	Antenna 1/4 Wave completely covered with polyolefin Heatshrink tuned to the center of band	$35.00
TNCMD	350mm	Antenna 1/4 Wave completely covered with polyolefin Heatshrink tuned to the center of band	$35.00
SMAMD	350mm	Antenna 1/4 Wave completely covered with polyolefin Heatshrink tuned to the center of band NOTE: The diameter of the base of the SMA is 12mm It may not fit your application please ask if in doubt.	$40.00

BNCVAR

TNCVAR

SMAVAR

Code	Length	Description	Price
BNCVAR	Approx 160mm	1/4 wave Helical covered with polyolefin rubber on a BNC Connector The BNCVAR has a bandwidth of 1Mhz < 1.5:1 SWR when tuned to the required frequency and is available from 70MHz to 200MHz, simply state the frequency required at the end of the code eg: BNCVAR160	$35.00
TNCVAR	Approx 160mm	1/4 wave Helical covered with polyolefin rubber on a BNC Connector The TNCVAR has a bandwidth of 1Mhz < 1.5:1 SWR when tuned to the required frequency and is available from 70MHz to 200MHz, simply state the frequency required at the end of the code eg: TNCVAR160	$35.00
SMAVAR	Approx 160mm	1/4 wave Helical covered with polyolefin rubber on a BNC Connector The SMAVAR has a bandwidth of 1Mhz < 1.5:1 SWR when tuned to the required frequency and is available from 70MHz to 200MHz, simply state the frequency required at the end of the code eg: SMAVAR160 NOTE: The diameter of the base of the SMA is 12mm It may not fit your application please ask if in doubt.	$45.00

Code	Length	Description	Price
RDRMHI	270mm	Solid fibreglass former with flexible spring top & coated with black polyolefin rubber This antenna is available for frequencies from 150MHz to 180MHz state the tx frequency range required ƒ Recommended Accessories - UL12C with BMS or Mag12C. Note: You can use a spring SAL or SAO but the antenna will need to be re-tuned on the spring	$40.00

Code	Length	Description	Price
SW2	630mm	Stainless steel 1/4 wave 1.6mm thick constant diameter with 5/16" fitting This antenna is available for frequencies from 150MHz to 180MHz state the tx frequency range required ƒ Recommended Accessories - UL12C with BMS or Mag12C. Note: You can use a spring SAL or SAO but the antenna will need to be re-tuned on the spring	$30.00

Code	Length	Description	Price
M151-1	630mm	Fibreglass 1/4 wave 5mm thick constant diameter with 5/16" fitting coated with PVC black or white This antenna is available for frequencies from 150MHz to 180MHz state the tx frequency range required ƒ Recommended Accessories - UL12C with BMS or Mag12C. Note: You can use a spring SAL or SAO but the antenna will need to be re-tuned on the spring	$30.00

Code	Length	Gain	Description	Price
M151-2	780mm	2.14dB	Fibreglass 1/2wave 4.5mm thick constant diameter with 5/16" fitting coated with PVC black This antenna is available for frequencies from 150MHz to 180MHz state the tx frequency range required ƒ Recommended Accessories - UL12C with BMS or Mag12C. Note: You can use a spring SAL or SAO but the antenna will need to be re-tuned on the spring	$40.00

Code	Length	Gain	Description	Price
M151-3	1300mm	3.3dB	Fibreglass 5/8 wave tapered from 6.5mm to 4mm with 5/16" fitting coated with PVC black This antenna is available for frequencies from 150MHz to 180MHz state the tx frequency range required ƒ Recommended Accessories - UL12C with BMS or Mag12C. Note: You can use a spring SAL or SAO but the antenna will need to be re-tuned on the spring	$45.00

The antennas below are Ground Independent - not requiring a ground plane

Code	Length	Gain	Description	Price
SAU151	1200mm	3dB	Hollow fibreglass 1/2 wave ground independent with a stainless steel spring that has a 1/2" mounting This antenna is available in white or black and with any configuration of coax and connectors. This antenna is also made for frequencies that range from 120MHz to 210MHz Recommended Accessories - BMS	ASK

Code	Length	Gain	Description	Price
CP151	1200mm	3dB	Hollow fibreglass 1/2 wave ground independent with a quick disconnect male PL259 base to suit any SO239 fitting such as the mobile one SAM2S or SOC12C mounts and is available in black or white. This antenna is also made for frequencies that range from 120MHz to 210MHz Recommended Accessories - SAM2s with BMS or SOC12C with BMS	ASK

Code	Length	Gain	Description	Price
CPS151	1230mm	3dB	Hollow fibreglass 1/2 wave ground independent with a heavy duty stainless steel spring incorporating a quick disconnect male PL259 base to suit any SO239 fitting such as the mobile one SAM2S or SOC12C mounts and is available in black or white. This antenna is also made for frequencies that range from 120MHz to 210MHz Recommended Accessories - SAM2s with BMS or SOC12C with BMS	ASK

156MHz to 162MHz top
(see Marine antenna section)

Mobile One make a range of VHF Marine radio antennas

163MHz to 180MHz top

VHF HI Band Commercial

The antennas below are made for various frequencies ranging from 163MHz to 180MHz

BNCMD

TNCMD

SMAMD

Code	Length	Description	Price
BNCMD	350mm	Antenna 1/4 Wave completely covered with polyolefin Heatshrink tuned to the center of band	$35.00
TNCMD	350mm	Antenna 1/4 Wave completely covered with polyolefin Heatshrink tuned to the center of band	$35.00
SMAMD	350mm	Antenna 1/4 Wave completely covered with polyolefin Heatshrink tuned to the center of band NOTE: The diameter of the base of the SMA is 12mm It may not fit your application please ask if in doubt.	$40.00

BNCVAR

TNCVAR

SMAVAR

Code	Length	Description	Price
BNCVAR	Approx 160mm	1/4 wave Helical covered with polyolefin rubber on a BNC Connector The BNCVAR has a bandwidth of 1Mhz < 1.5:1 SWR when tuned to the required frequency and is available from 70MHz to 200MHz, simply state the frequency required at the end of the code eg: BNCVAR160	$35.00
TNCVAR	Approx 160mm	1/4 wave Helical covered with polyolefin rubber on a BNC Connector The TNCVAR has a bandwidth of 1Mhz < 1.5:1 SWR when tuned to the required frequency and is available from 70MHz to 200MHz, simply state the frequency required at the end of the code eg: TNCVAR160	$35.00
SMAVAR	Approx 160mm	1/4 wave Helical covered with polyolefin rubber on a BNC Connector The SMAVAR has a bandwidth of 1Mhz < 1.5:1 SWR when tuned to the required frequency and is available from 70MHz to 200MHz, simply state the frequency required at the end of the code eg: SMAVAR160 NOTE: The diameter of the base of the SMA is 12mm It may not fit your application please ask if in doubt.	$45.00

Code	Length	Description	Price
RDRMHI	250mm	Solid fibreglass former with flexible spring top & coated with black polyolefin rubber This antenna is available for frequencies from 150MHz to 180MHz state the tx frequency range required ƒ Recommended Accessories - UL12C with BMS or Mag12C. Note: You can use a spring SAL or SAO but the antenna will need to be re-tuned on the spring	$40.00

Code	Length	Description	Price
SW2	400mm	Stainless steel 1/4 wave 1.6mm thick constant diameter with 5/16" fitting This antenna is available for frequencies from 150MHz to 180MHz state the tx frequency range required ƒ Recommended Accessories - UL12C with BMS or Mag12C. Note: You can use a spring SAL or SAO but the antenna will need to be re-tuned on the spring	$30.00

Code	Length	Description	Price
M172-1	400mm	Fibreglass 1/4 wave 5mm thick constant diameter with 5/16" fitting coated with PVC black or white This antenna is available for frequencies from 150MHz to 180MHz state the tx frequency range required ƒ Recommended Accessories - UL12C with BMS or Mag12C. Note: You can use a spring SAL or SAO but the antenna will need to be re-tuned on the spring	$30.00

Code	Length	Gain	Description	Price
M172-2	730mm	2.14dB	Fibreglass 1/2wave 4.5mm thick constant diameter with 5/16" fitting coated with PVC black This antenna is available for frequencies from 150MHz to 180MHz state the tx frequency range required ƒ Recommended Accessories - UL12C with BMS or Mag12C. Note: You can use a spring SAL or SAO but the antenna will need to be re-tuned on the spring	$40.00

Code	Length	Gain	Description	Price
M172-3	1200mm	3.3dB	Fibreglass 5/8 wave tapered from 6.5mm to 4mm with 5/16" fitting coated with PVC black This antenna is available for frequencies from 150MHz to 180MHz state the tx frequency range required ƒ Recommended Accessories - UL12C with BMS or Mag12C. Note: You can use a spring SAL or SAO but the antenna will need to be re-tuned on the spring	$45.00

The antennas below are Ground Independent - not requiring a ground plane

Code	Length	Gain	Description	Price
SAU172	1200mm	3dB	Hollow fibreglass 1/2 wave ground independent with a stainless steel spring that has a 1/2" mounting This antenna is available in white or black and with any configuration of coax and connectors. This antenna is also made for frequencies that range from 120MHz to 210MHz Recommended Accessories - BMS	ASK

Code	Length	Gain	Description	Price
CP172	1200mm	3dB	Hollow fibreglass 1/2 wave ground independent with a quick disconnect male PL259 base to suit any SO239 fitting such as the mobile one SAM2S or SOC12C mounts and is available in black or white. This antenna is also made for frequencies that range from 120MHz to 210MHz Recommended Accessories - SAM2s with BMS or SOC12C with BMS	ASK

Code	Length	Gain	Description	Price
CPS172	1230mm	3dB	Hollow fibreglass 1/2 wave ground independent with a heavy duty stainless steel spring incorporating a quick disconnect male PL259 base to suit any SO239 fitting such as the mobile one SAM2S or SOC12C mounts and is available in black or white. This antenna is also made for frequencies that range from 120MHz to 210MHz Recommended Accessories - SAM2s with BMS or SOC12C with BMS	ASK

180MHz to 220MHz top

Digital Radio DAB+ & Digital TV

(see Radio antenna section)

Mobile One make a range of VHF Marine radio antennas

400MHz to 476MHz top

UHF Commercial Bands
State frequency f MHz

BNCMD

TNCMD

SMAMD

Code	Length	Description	Price
BNCMD	160mm	BNC, 1/4 wave helical internals & tough nylon tubing covered with polyolefin rubber. Mobile One supplies these antennas tuned to your required frequency, simply state the frequency required at the end of the code eg: BNCMD468	$35.00
TNCMD	160mm	TNC, 1/4 wave helical internals & tough nylon tubing covered with polyolefin rubber. Mobile One supplies these antennas tuned to your required frequency, simply state the frequency required at the end of the code eg: TNCMD468	$35.00
SMAMD	160mm	SMA, 1/4 wave helical internals & tough nylon tubing covered with polyolefin rubber. Mobile One supplies these antennas tuned to your required frequency, simply state the frequency required at the end of the code eg: SMAMD468 NOTE: The diameter of the base of the SMA is 12mm It may not fit your application please ask if in doubt.	$45.00

BNCHW

TNCHW

SMAHW

PLHW

Code	Length	Gain	Description	Price
BNCHW	350mm	3dB	Ground Independent 1/2 wave internals & tough nylon tubing covered with polyolefin heatshrink on a BNC The BNCHW has a bandwidth of 4Mhz < 1.5:1 SWR when tuned to the required frequency and is available from 400MHz to 2.4gHz, simply state the frequency required at the end of the code eg: BNCHW468	$40.00
TNCHW	350mm	3dB	Ground Independent 1/2 wave internals & tough nylon tubing covered with polyolefin heatshrink on a TNC The TNCHW has a bandwidth of 4Mhz < 1.5:1 SWR when tuned to the required frequency and is available from 400MHz to 2.4gHz, simply state the frequency required at the end of the code eg: TNCHW468	$40.00
SMAHW	350mm	3dB	Ground Independent 1/2 wave internals & tough nylon tubing covered with polyolefin heatshrink on a SMA The SMAHW has a bandwidth of 4Mhz < 1.5:1 SWR when tuned to the required frequency and is available from 400MHz to 2.4gHz, simply state the frequency required at the end of the code eg: SMAHW468 NOTE: The diameter of the base of the SMA is 12mm It may not fit your application please ask if in doubt.	$50.00
PLHW	350mm	3dB	Ground Independent 1/2 wave internals & tough nylon tubing covered with polyolefin heatshrink on a PL259 The PLHW has a bandwidth of 4Mhz < 1.5:1 SWR when tuned to the requiredfrequency and is available from 400MHz to 2.4gHz, simply state the frequency required at the end of the code eg: PLHW468 Recommended Accessories - SOC12C on a BMS or MHRB12SOC	$50.00

FDW470

Code	Length	Description	Price
FDW410	154mm	Antenna UHF 1/4 Wave stainless steel wire rope and coated with rubber - 410MHz to 430MHz Recommended accessories - UL12BNC or UL12C with BMS or Mag12C Note: You can NOT use a spring with this antenna.	$15.00
FDW430	147mm	Antenna UHF 1/4 Wave stainless steel wire rope and coated with rubber - 430MHz to 450MHz Recommended accessories - UL12BNC or UL12C with BMS or Mag12C Note: You can NOT use a spring with this antenna.	$15.00
FDW450	140mm	Antenna UHF 1/4 Wave stainless steel wire rope and coated with rubber - 450MHz to 470MHz Recommended accessories - UL12BNC or UL12C with BMS or Mag12C Note: You can NOT use a spring with this antenna.	$15.00
FDW470	135mm	Antenna UHF 1/4 Wave stainless steel wire rope and coated with rubber - 470MHz to 490MHz Recommended accessories - UL12BNC or UL12C with BMS or Mag12C Note: You can NOT use a spring with this antenna.	$15.00
FDW490	130mm	Antenna UHF 1/4 Wave stainless steel wire rope and coated with rubber - 490MHz to 520MHz Recommended accessories - UL12BNC or UL12C with BMS or Mag12C Note: You can NOT use a spring with this antenna.	$15.00

Code	Frequency	Length	Description	Price
M410	410~420MHz	710mm	Antenna UHF collinear fibreglass covered with pvc 4.5dB gain Recommended Accessories - UL12BNC or UL12C with BMS or Mag12C Note: You can NOT use a spring with this antenna.	$30.00

Code	Frequency	Length	Description	Price
M430	430~440MHz	680mm	Antenna UHF collinear fibreglass covered with pvc 4.5dB gain Recommended Accessories - UL12BNC or UL12C with BMS or Mag12C Note: You can NOT use a spring with this antenna.	$30.00

Code	Frequency	Length	Description	Price
M460	460~470MHz	640mm	Antenna UHF collinear fibreglass covered with pvc 4.5dB gain Recommended Accessories - UL12BNC or UL12C with BMS or Mag12C Note: You can NOT use a spring with this antenna.	$30.00

Code	Frequency	Length	Gain	Description	Price
C420H	410MHz to 420MHz	350mm	3dB	1/2 wave ground independent antenna with internal LC network plus 3.6m coax NOTE: This antenna has a usable bandwidth of 10MHz and is made for any frequency on the UHF band from 400MHz to 520MHz and with any length of coax and any type of connector that may be required. Recommended Accessories - BMS	ASK

476MHz to 478MHz top

(see UHF CB Band section)
UHF CB Band

Mobile One make such a large range of UHF antennas, it is simpler to direct you to the UHF CB section
most of the antennas made for 477MHz UHF CB are also available from 400MHz to 520MHz

530MHz to 800MHz top

UHF TV and Digital TV Band

Mobile One has made many different antennas for Digital TV for Marine applications on various frequencies
and has designed antennas for NZ Marine and Digital TV - Please Inquire.

800MHz to 900MHz

Telstra NextG / 3
(see NextG Phone section)

900MHz to 1000MHz

Optus / Vodaphone GSM
(see GSM Phone section)

1000MHz to 2.4gHz

M1 Code	Length	Gain	Price A$	M1 Code	Length	Gain	Price A$
C1300H	200mm	3dB	$75.00	K1300H4	220mm	3dB	ASK
Low profile ground independent 1/2 wave antenna with 7/16" fitting to suit a gutter mount, boot mount, Z bracket or similar, usually supplied with 3.6m coax plus a fme connector but can be supplied with any length of cable and with any connector. This antenna is available for any particular frequency and has 90MHz bandwidth <1.6:1 VSWR Recommended Accessories - BMS				Low profile ground independent 1/2 wave antenna on a magnet mount, usually supplied with 3.6m coax plus a fme connector but can be supplied with any length of cable and with any connector and is available for any particular frequency and has 90MHz bandwidth <1.6:1 VSWR

Please note that any antenna seen on this page can be made to a particular frequency

BNCHW

TNCHW

SMAHW

Code	Length	Gain	Description	Price
BNCHW	100mm	3dB	Ground Independent 1/2 wave internals & tough nylon tubing covered with polyolefin heatshrink on a BNC The BNCHW has a bandwidth of 4Mhz < 1.5:1 SWR when tuned to the required frequency and is available from 400MHz to 2.4gHz, simply state the frequency required at the end of the code eg: BNCHW1200	$40.00
TNCHW	100mm	3dB	Ground Independent 1/2 wave internals & tough nylon tubing covered with polyolefin heatshrink on a TNC The TNCHW has a bandwidth of 4Mhz < 1.5:1 SWR when tuned to the required frequency and is available from 400MHz to 2.4gHz, simply state the frequency required at the end of the code eg: TNCHW1200	$40.00
SMAHW	100mm	3dB	Ground Independent 1/2 wave internals & tough nylon tubing covered with polyolefin heatshrink on a SMA The SMAHW has a bandwidth of 4Mhz < 1.5:1 SWR when tuned to the required frequency and is available from 400MHz to 2.4gHz, simply state the frequency required at the end of the code eg: SMAHW1200 NOTE: The diameter of the base of the SMA is 12mm It may not fit your application please ask if in doubt.	$50.00

2.4gHz

M1 Code	Length	Gain	Price A$	M1 Code	Length	Gain	Price A$
C2400H	100mm	3dB	$75.00	K2400H4	100mm	3dB	ASK
Low profile ground independent 1/2 wave antenna with 7/16" fitting to suit a gutter mount, boot mount, Z bracket or similar, usually supplied with 3.6m coax plus a fme connector but can be supplied with any length of cable and with any connector. This antenna is available for any particular frequency and has 130MHz bandwidth <1.6:1 VSWR Recommended Accessories - BMS				Low profile ground independent 1/2 wave antenna on a magnet mount, usually supplied with 3.6m coax plus a fme connector but can be supplied with any length of cable and with any connector and is available for any particular frequency and has 130MHz bandwidth <1.6:1 VSWR

SMAHW

Code	Length	Gain	Description	Price
SMAHW2400	70mm	3dB	Ground Independent 1/2 wave internals & tough nylon tubing covered with polyolefin heatshrink on a SMA The SMAHW has a bandwidth of 4Mhz < 1.5:1 SWR when tuned to the required frequency and is available from 400MHz to 2.4gHz, simply state the frequency required at the end of the code eg: SMAHW2400 NOTE: The diameter of the base of the SMA is 12mm It may not fit your application please ask if in doubt.	$50.00

All Other Antennas

If you are needing that special antenna that does not yet exist please phone us All of the antennas below are made with Australian Fibreglass and fittings - please support Australian Made 70MHz to 88MHz 150MHz to 210MHz 400MHz to 476MHz 530MHz to 2.4gHz

525kHz to 2MHz (See Radio AM/FM Antennas Section)

2MHz to 25MHz See Ham Band antenna section for more ideas

26MHz to 27MHz

New Zealand HF CB Radio Band 26.330MHz to 26.770MHz

27MHz to 28MHz (See Australian 27MHz HF CB Antennas)

28MHz to 29MHz marine (see Marine antenna section)

28MHz to 30MHz (see Ham antenna section)

30MHz to 69MHz

6m Ham band , Baby monitors, cordless phone & remote control systems

70MHz to 88MHz top

Low band VHF - some country fire, ambulance, police & taxi

Base Station Antenna 70MHz to 88MHz

88MHz to 108MHz (see Broadcast antenna section)

108MHz to 136MHz (see Air band antenna section)

136MHz to 149MHz (see Amateur Bands section)

150MHz to 155MHz top

VHF HI Band Commercial + Digital Radio & TV Frequencies

The antennas below are made for various frequencies ranging from 150MHz to 210MHz

The antennas below are Ground Independent - not requiring a ground plane

156MHz to 162MHz top (see Marine antenna section)

163MHz to 180MHz top

VHF HI Band Commercial

The antennas below are made for various frequencies ranging from 163MHz to 180MHz

The antennas below are Ground Independent - not requiring a ground plane

180MHz to 220MHz top

Digital Radio DAB+ & Digital TV

(see Radio antenna section)

400MHz to 476MHz top

UHF Commercial Bands State frequency f MHz

476MHz to 478MHz top

(see UHF CB Band section) UHF CB Band

530MHz to 800MHz top

UHF TV and Digital TV Band

800MHz to 900MHz

Telstra NextG / 3 (see NextG Phone section)

900MHz to 1000MHz

Optus / Vodaphone GSM (see GSM Phone section)

1000MHz to 2.4gHz

Please note that any antenna seen on this page can be made to a particular frequency

2.4gHz

If you cant find it? - we can probably make it!

AND THERES STILL LOTS MORE AUSTRALIAN MADE ANTENNAS AVAILABLE AT MOBILE ONE

If you are needing that special antenna that does not yet exist please phone us
All of the antennas below are made with Australian Fibreglass and fittings - please support Australian Made
70MHz to 88MHz 150MHz to 210MHz 400MHz to 476MHz 530MHz to 2.4gHz

525kHz to 2MHz
(See Radio AM/FM Antennas Section)

2MHz to 25MHz
See Ham Band antenna section for more ideas

27MHz to 28MHz
(See Australian 27MHz HF CB Antennas)

28MHz to 29MHz marine
(see Marine antenna section)

28MHz to 30MHz
(see Ham antenna section)

88MHz to 108MHz
(see Broadcast antenna section)

108MHz to 136MHz
(see Air band antenna section)

136MHz to 149MHz
(see Amateur Bands section)

156MHz to 162MHz top
(see Marine antenna section)

UHF Commercial Bands
State frequency f MHz

(see UHF CB Band section)
UHF CB Band

Telstra NextG / 3
(see NextG Phone section)

Optus / Vodaphone GSM
(see GSM Phone section)