HAM Bands Antennas

Click Here to learn all about Amateur Band Antennas

80m to 10m Band Antennas 3.5MHz to 28MHz

Code	Frequency	Length	Mount	Description	Price
M80-1	3.5~3.8MHz	1800mm	5/16"	Antenna HF Solid fibreglass top loaded with adjustable frequency tuning top section. The M80-1 is a very heavy antenna, it should me mounted onto a bull bar Note: This is a heavy antenna and will need a bull bar or equivalent. Recommended Accessories - BaseBSS	$100.00 Order Here or phone 02-4655-6677
M80-1AS	3.5~3.8MHz	1800mm	1/2"	Antenna HF Solid fibreglass top loaded with adjustable frequency tuning top section. The M80-1AS is a very heavy antenna, it should me mounted onto a bull bar Note: This is a heavy antenna and will need a bull bar or equivalent. Recommended Accessories - SAM + C12C or equivalent	$100.00 Order Here or phone 02-4655-6677

Code

Frequency

Length

Mount

Description

Price

M80-1

3.5~3.8MHz

1800mm

5/16"

Antenna HF Solid fibreglass top loaded with adjustable frequency tuning top section. The M80-1 is a very heavy antenna, it should me mounted onto a bull bar

Note: This is a heavy antenna and will need a bull bar or equivalent.
Recommended Accessories - BaseBSS

$100.00
Order Here
or phone 02-4655-6677

M80-1AS

3.5~3.8MHz

1800mm

1/2"

Antenna HF Solid fibreglass top loaded with adjustable frequency tuning top section. The M80-1AS is a very heavy antenna, it should me mounted onto a bull bar

Note: This is a heavy antenna and will need a bull bar or equivalent.
Recommended Accessories - SAM + C12C or equivalent

$100.00
Order Here
or phone 02-4655-6677

Code	Frequency	Length	Mount	Description	Price
M40-1	7~7.3MHz	1800mm	5/16"	Antenna HF Solid fibreglass top loaded with adjustable frequency tuning top section. The M40-1 is a very heavy antenna, it should me mounted onto a bull bar Note: This is a heavy antenna and will need a bull bar or equivalent. Recommended Accessories - BaseBSS	$100.00 Order Here or phone 02-4655-6677
M40-1AS	7~7.3MHz	1800mm	1/2"	Antenna HF Solid fibreglass top loaded with adjustable frequency tuning top section. The M40-1AS is a very heavy antenna, it should me mounted onto a bull bar Note: This is a heavy antenna and will need a bull bar or equivalent. Recommended Accessories - SAM + C12C or equivalent	$100.00 Order Here or phone 02-4655-6677

Code	Frequency	Length	Mount	Description	Price
M30-1	10~10.3MHz	1800mm	5/16"	Antenna HF Solid fibreglass top loaded with adjustable frequency tuning top section. The M30-1 is a very heavy antenna, it should me mounted onto a bull bar Note: This is a heavy antenna and will need a bull bar or equivalent. Recommended Accessories - BaseBSS	$100.00 Order Here or phone 02-4655-6677
M30-1AS	10~10.3MHz	1800mm	1/2"	Antenna HF Solid fibreglass top loaded with adjustable frequency tuning top section. The M30-1AS is a very heavy antenna, it should me mounted onto a bull bar Note: This is a heavy antenna and will need a bull bar or equivalent. Recommended Accessories - SAM + C12C or equivalent	$100.00 Order Here or phone 02-4655-6677

Code	Frequency	Length	Mount	Description	Price
M20-1	14~14.4MHz	1400mm	5/16"	Antenna HF Solid fibreglass top loaded with adjustable frequency tuning top section. The M20-1 is a very heavy antenna, it should me mounted onto a bull bar Note: This is a heavy antenna and will need a bull bar or equivalent. Recommended Accessories - BaseBSS	$100.00 Order Here or phone 02-4655-6677
M20-1AS	14~14.4MHz	1400mm	1/2"	Antenna HF Solid fibreglass top loaded with adjustable frequency tuning top section The M20-1AS is a very heavy antenna, it should me mounted onto a bull bar Note: This is a heavy antenna and will need a bull bar or equivalent. Recommended Accessories - SAM + C12C or equivalent	$100.00 Order Here or phone 02-4655-6677

Code	Frequency	Length	Mount	Description	Price
M15-1	21~21.5MHz	1400mm	5/16"	Antenna HF Solid fibreglass top loaded with adjustable frequency tuning top section The M15-1 is a very heavy antenna, it should me mounted onto a bull bar Note: This is a heavy antenna and will need a bull bar or equivalent. Recommended Accessories - BaseBSS	$100.00 Order Here or phone 02-4655-6677
M15-1AS	21~21.5MHz	1400mm	1/2"	Antenna HF Solid fibreglass top loaded with adjustable frequency tuning top section The M15-1AS is a very heavy antenna, it should me mounted onto a bull bar Note: This is a heavy antenna and will need a bull bar or equivalent. Recommended Accessories - SAM + C12C or equivalent	$100.00 Order Here or phone 02-4655-6677

For 10m Band Antennas 28MHz to 29MHz

Code	Frequency	Length	Mount	Description	Price
M6-1	50~54MHz	1370mm	5/16"	Antenna 1/4 Wave Solid fibreglass coated with polyolefin tuned to 52MHz. The M6-1 works best when mounted onto a bracket that is as close to the surface of the ground plane as possible such as the BMS mount (Z brackets are not recommended with this antenna) Recommended Accessories - UL12BNC or UL12C with BMS or Mag12C Note: You can use a spring SAL or SAO but the antenna will need to be re-tuned on the spring.	$45.00 Order Here or phone 02-4655-6677

Code	Length	Description	Price
BNCVAR146	210mm 8"	A 1/4 wave helical antenna with BNC connector, covered entirely with polyolefin rubber heatshrink. The BNCVAR146 has a specially made 1/4λ phosphor bronze helical coil tuned to produce an exceptionally broadband antenna for use on the entire 2m Band 144MHz to 148MHz. Note: Also ideal for scanners that are mainly used on the 2 metre band.	$35.00 Order Here or phone 02-4655-6677

Code	Frequency	Length	Description	Price
RDRM146	144~148MHz	220mm	Solid fibreglass former with flexible spring top & coated with black polyolefin rubber on a 5/16" fitting. The RDRM146 works best when mounted onto a bracket that is as close to the surface of the ground plane as possible such as the BMS mount (Z brackets are not recommended with this antenna) Recommended Accessories - UL12BNC or UL12C with BMS or Mag12C Note: You can use a spring SAL or SAO but the antenna will need to be re-tuned on the spring.	$40.00 Order Here or phone 02-4655-6677

Code	Frequency	Length	Description	Price
SW2	144~148MHz	630mm	Stainless steel 1/4 wave antenna suitable for 2m band applications on a 5/16" fitting. The SW2 works best when mounted onto a bracket that is as close to the surface of the ground plane as possible such as the BMS mount. (Z brackets are not recommended with this antenna) Recommended Accessories - UL12BNC or UL12C with BMS or Mag12C Note: You can use a spring SAL or SAO but the antenna will need to be re-tuned on the spring.	$30.00 Order Here or phone 02-4655-6677

Code	Frequency	Length	Description	Price
SWP	144~148MHz	630mm	Stainless steel 1/4 wave antenna suitable for 2m band and high band VHF applications tuneable from 108MHz. This antenna is not pretuned and comes with a cutting chart for customer tuning. The SW2 works best when mounted onto a bracket that is as close to the surface of the ground plane as possible such as the BMS mount. (Z brackets are not recommended with this antenna) Recommended Accessories - UL12BNC or UL12C with BMS or Mag12C Note: You can use a spring SAL or SAO but the antenna will need to be re-tuned on the spring.	$55.00 Order Here or phone 02-4655-6677

Code	Frequency	Length	Description	Price
M144-1	144~148MHz	590mm	Fibreglass 1/4 wave antenna suitable for the 2m band on a 5/16" fitting The M144-1 works best when mounted onto a bracket that is as close to the surface of the ground plane as possible such as the BMS mount (Z brackets are not recommended with this antenna) Recommended Accessories - UL12BNC or UL12C with BMS or Mag12C Note: You can use a spring SAL or SAO but the antenna will need to be re-tuned on the spring	$30.00 Order Here or phone 02-4655-6677

Code	Frequency	Length	Gain	Description	Price
M144-2	144~148MHz	780mm	2dBi	Antenna Helical wound 1/2 wave solid fibreglass covered with PVC 2.14dB Gain The M144-2 works best when mounted onto a bracket that is as close to the surface of the ground plane as possible such as the BMS mount (Z brackets are not recommended with this antenna) Recommended Accessories - UL12BNC or UL12C with BMS or Mag12C Note: You can use a spring SAL or SAO but the antenna will need to be re-tuned on the spring	$40.00 Order Here or phone 02-4655-6677

Code	Frequency	Length	Gain	Description	Price
M144-3	144~148MHz	1350mm	4dBi	Fibreglass 5/8 wave antenna suitable for vehicle and base applications on a 5/16" fitting The M144-3 works best when mounted onto a bracket that is as close to the surface of the ground plane as possible such as the BMS mount (Z brackets are not recommended with this antenna) Recommended Accessories - UL12BNC or UL12C with BMS or Mag12C Note: You can NOT use a spring with this antenna.	$45.00 Order Here or phone 02-4655-6677

Code	Frequency	Length	Gain	Description	Price
COL146	144~148MHz	1450mm	3dBi	Hollow fibreglass 1/2 wave ground independent with with 20mm aluminium anodized tube for mast mounting. This antenna is broadband covering the entire 2m ham band 146MHz to 148MHz without the need for tuning. The COL146 has one metre of cable terminated with a N Connector Female.	ASK Order Here or phone 02-4655-6677

Code	Frequency	Length	Description	Price
FDW430	430~450MHz	147mm	Antenna UHF 1/4 Wave stainless steel wire rope and coated with rubber - 430MHz to 450MHz Recommended Accessories - UL12BNC or UL12C with BMS or Mag12C Note: You can NOT use a spring with this antenna.	$15.00 Order Here or phone 02-4655-6677

Code	Frequency	Length	Gain	Description	Price
M430	425~445MHz	620mm	4.5dBi	Antenna UHF collinear fibreglass covered with PVC 4.5dB gain Recommended Accessories - UL12BNC or UL12C with BMS or Mag12C Note: You can NOT use a spring with this antenna.	$35.00 Order Here or phone 02-4655-6677

Code	Frequency	Length	Gain	Description	Price
M270	144~148MHz 425~445MHz	975mm	4.5dBi	Antenna UHF collinear fibreglass covered with PVC 4.5dB gain on UHF Unity gain on 2m Recommended Accessories - UL12BNC or UL12C with BMS or Mag12C Note: You can NOT use a spring with this antenna. Note: The M270 needs a small ground plane area and should be mounted close to the ground plane, do not use a z bracket as the z bracket will cause a untuned dipole effect on UHF you should use a BMS - The best mounting is on the front bonnet of the car on a BMS. Pros - Combine 2m & 70cm bands in one Cons - There is ne electrical relationship between the bands, all 2m/70cm antennas are a critical compromise using separate antennas will provide a much better result Note: There is no such thing as a ground independent dual band antenna "That actually works"	$45.00 Order Here or phone 02-4655-6677

M1 Code	Length	Gain	Price A$	M1 Code	Length	Gain	Price A$
C433H	350mm	3dBi	Ask Order Here or phone 02-4655-6677	C433H4	370mm	3dBi	Ask Order Here or phone 02-4655-6677
Low profile ground independent 1/2 wave antenna with 7/16" fitting to suit a gutter mount, boot mount, Z bracket or similar, usually supplied with 3.6m coax plus a BNC connector but can be supplied with any length of cable and with any connector.	Low profile ground independent 1/2 wave antenna on a magnet mount, usually supplied with 3.6m coax plus a fme connector but can be supplied with any length of cable and with any connector and is available for any particular frequency

Mobile One recommends we adjust some 27MHz CB Antennas
go to 27MHz antenna section then select a design then give us a call

6m Band Antennas 50MHz to 54MHz

Code Frequency Length Mount Description Price

M6-1 50~54MHz 1370mm 5/16"
Antenna 1/4 Wave Solid fibreglass coated with polyolefin tuned to 52MHz. The M6-1 works best when mounted onto a bracket that is as close to the surface of the ground plane as possible such as the BMS mount (Z brackets are not recommended with this antenna)

Recommended Accessories - UL12BNC or UL12C with BMS or Mag12C
Note: You can use a spring SAL or SAO but the antenna will need to be re-tuned on the spring.
$45.00
Order Here
or phone 02-4655-6677

2m Band Antennas 144MHz to 148MHz

BNCVAR146

Code Length Description Price

BNCVAR146 210mm
8"
A 1/4 wave helical antenna with BNC connector, covered entirely with polyolefin rubber heatshrink. The BNCVAR146 has a specially made 1/4λ phosphor bronze helical coil tuned to produce an exceptionally broadband antenna for use on the entire 2m Band 144MHz to 148MHz.

Note: Also ideal for scanners that are mainly used on the 2 metre band.
$35.00
Order Here
or phone 02-4655-6677

SMAVAR146 for radios where the SMA antenna connector is extended from the case of the radio

Code Length Description Price

SMAVAR146 210mm
8"
A 1/4 wave helical antenna with SMA connector designed especially for exposed SMA connectors on hand held radios and covered entirely with polyolefin rubber heatshrink.

The SMAVAR146 has a specially made 1/4λ phosphor bronze helical coil tuned to produce an exceptionally broadband antenna for use on the entire Air Band 144MHz to 148MHz.

Note: Also ideal for scanners that are mainly used for 2m band.
Note: The SMAVAR146 has a diameter of 12mm at its base and may not fit some radios that have the SMA connector recessed into the radio, if this is the case then the SMAIVAR146 is the better choice.

$45.00
Order Here
or phone
02-4655-6677

SMAIVAR146 for radios where the SMA antenna connector is recessed into the case of the radio

Code Length Description Price

SMAIVAR146 210mm
8"
A 1/4 wave helical antenna with SMA connector designed especially for recessed SMA connectors on hand held radios and covered entirely with polyolefin rubber heatshrink.

The SMAIVAR146 has a specially made 1/4λ phosphor bronze helical coil tuned to produce an exceptionally broadband antenna for use on the entire Air Band 144MHz to 148MHz.

Note: Also ideal for scanners that are mainly used for 2m band.
Note: The SMAIVAR146 will fit all hand held radios and scanners that have a SMA connection.

$45.00
Order Here
or phone
02-4655-6677

Code Frequency Length Description Price

RDRM146 144~148MHz 220mm
Solid fibreglass former with flexible spring top & coated with black polyolefin rubber on a 5/16" fitting. The RDRM146 works best when mounted onto a bracket that is as close to the surface of the ground plane as possible such as the BMS mount (Z brackets are not recommended with this antenna)

Recommended Accessories - UL12BNC or UL12C with BMS or Mag12C
Note: You can use a spring SAL or SAO but the antenna will need to be re-tuned on the spring.
$40.00
Order Here
or phone 02-4655-6677

Code Frequency Length Description Price

SW2 144~148MHz 630mm
Stainless steel 1/4 wave antenna suitable for 2m band applications on a 5/16" fitting. The SW2 works best when mounted onto a bracket that is as close to the surface of the ground plane as possible such as the BMS mount. (Z brackets are not recommended with this antenna)

Recommended Accessories - UL12BNC or UL12C with BMS or Mag12C
Note: You can use a spring SAL or SAO but the antenna will need to be re-tuned on the spring.
$30.00
Order Here
or phone 02-4655-6677

Code Frequency Length Description Price

SWP 144~148MHz 630mm
Stainless steel 1/4 wave antenna suitable for 2m band and high band VHF applications tuneable from 108MHz. This antenna is not pretuned and comes with a cutting chart for customer tuning. The SW2 works best when mounted onto a bracket that is as close to the surface of the ground plane as possible such as the BMS mount. (Z brackets are not recommended with this antenna)

Recommended Accessories - UL12BNC or UL12C with BMS or Mag12C
Note: You can use a spring SAL or SAO but the antenna will need to be re-tuned on the spring.
$55.00
Order Here
or phone 02-4655-6677

Code Frequency Length Description Price

M144-1 144~148MHz 590mm
Fibreglass 1/4 wave antenna suitable for the 2m band on a 5/16" fitting
The M144-1 works best when mounted onto a bracket that is as close to the surface of the ground plane as possible such as the BMS mount (Z brackets are not recommended with this antenna)

Recommended Accessories - UL12BNC or UL12C with BMS or Mag12C
Note: You can use a spring SAL or SAO but the antenna will need to be re-tuned on the spring
$30.00
Order Here
or phone 02-4655-6677

Code Frequency Length Gain Description Price

M144-2 144~148MHz 780mm 2dBi
Antenna Helical wound 1/2 wave solid fibreglass covered with PVC 2.14dB Gain
The M144-2 works best when mounted onto a bracket that is as close to the surface of the ground plane as possible such as the BMS mount (Z brackets are not recommended with this antenna)

Recommended Accessories - UL12BNC or UL12C with BMS or Mag12C
Note: You can use a spring SAL or SAO but the antenna will need to be re-tuned on the spring
$40.00
Order Here
or phone 02-4655-6677

Code Frequency Length Gain Description Price

M144-3 144~148MHz 1350mm 4dBi
Fibreglass 5/8 wave antenna suitable for vehicle and base applications on a 5/16" fitting
The M144-3 works best when mounted onto a bracket that is as close to the surface of the ground plane as possible such as the BMS mount (Z brackets are not recommended with this antenna)

Recommended Accessories - UL12BNC or UL12C with BMS or Mag12C
Note: You can NOT use a spring with this antenna.
$45.00
Order Here
or phone 02-4655-6677

Code Frequency Length Gain Description Price

COL146 144~148MHz 1450mm 3dBi
Hollow fibreglass 1/2 wave ground independent with with 20mm aluminium anodized tube for mast mounting. This antenna is broadband covering the entire 2m ham band 146MHz to 148MHz without the need for tuning. The COL146 has one metre of cable terminated with a N Connector Female.

ASK
Order Here
or phone 02-4655-6677

70cm Band Antennas 430MHz to 440MHz

Code Frequency Length Description Price

FDW430 430~450MHz 147mm
Antenna UHF 1/4 Wave stainless steel wire rope and coated with rubber - 430MHz to 450MHz

Recommended Accessories - UL12BNC or UL12C with BMS or Mag12C
Note: You can NOT use a spring with this antenna.
$15.00
Order Here
or phone 02-4655-6677

Code Frequency Length Gain Description Price

M430 425~445MHz 620mm 4.5dBi
Antenna UHF collinear fibreglass covered with PVC 4.5dB gain

Recommended Accessories - UL12BNC or UL12C with BMS or Mag12C
Note: You can NOT use a spring with this antenna.
$35.00
Order Here
or phone 02-4655-6677

Code Frequency Length Gain Description Price

M270
144~148MHz
425~445MHz
975mm 4.5dBi
Antenna UHF collinear fibreglass covered with PVC 4.5dB gain on UHF Unity gain on 2m

Recommended Accessories - UL12BNC or UL12C with BMS or Mag12C
Note: You can NOT use a spring with this antenna.
Note: The M270 needs a small ground plane area and should be mounted close to the ground plane, do not use a z bracket as the z bracket will cause a untuned dipole effect on UHF you should use a BMS - The best mounting is on the front bonnet of the car on a BMS.

Pros - Combine 2m & 70cm bands in one
Cons - There is ne electrical relationship between the bands, all 2m/70cm antennas are a critical compromise using separate antennas will provide a much better result

Note: There is no such thing as a ground independent dual band antenna "That actually works"

$45.00
Order Here
or phone 02-4655-6677

M1 Code Length Gain Price A$ M1 Code Length Gain Price A$

C433H 350mm 3dBi
Ask
Order Here
or phone 02-4655-6677
C433H4 370mm 3dBi Ask
Order Here
or phone 02-4655-6677

Low profile ground independent 1/2 wave antenna with 7/16" fitting to suit a gutter mount, boot mount, Z bracket or similar, usually supplied with 3.6m coax plus a BNC connector but can be supplied with any length of cable and with any connector.

Low profile ground independent 1/2 wave antenna on a magnet mount, usually supplied with 3.6m coax plus a fme connector but can be supplied with any length of cable and with any connector and is available for any particular frequency

Copyright © 2011 by Pride Industries. Web site & artwork created by Peter Pride.

HAM Bands Antennas

80m to 10m Band Antennas 3.5MHz to 28MHz

For 10m Band Antennas 28MHz to 29MHz

Mobile One recommends we adjust some 27MHz CB Antennas go to 27MHz antenna section then select a design then give us a call

6m Band Antennas 50MHz to 54MHz

2m Band Antennas 144MHz to 148MHz

SMAVAR146 for radios where the SMA antenna connector is extended from the case of the radio

SMAIVAR146 for radios where the SMA antenna connector is recessed into the case of the radio

70cm Band Antennas 430MHz to 440MHz

Mobile One recommends we adjust some 27MHz CB Antennas
go to 27MHz antenna section then select a design then give us a call