Low profile GSM/3G ground independent 1/2 wave antenna with 7/16" fitting to suit a gutter mount, boot mount, Z bracket or similar, usually supplied with 3.6m coax plus a fme connector but can be supplied with any length of cable and with any connector.

Recommended accessories - BMS

Low profile GSM/3G ground independent 1/2 wave antenna on a magnet mount, usually supplied with 3.6m coax plus a fme connector but can be supplied with any length of cable and with any connector.

Specifications

1. Order Code ..... RF925FW
2. Type ........... Raised Feed Dipole
3. Pattern ........ Omnidirectional
4. Base Length .... 153mm or 6"
5. Total Length ... 465mm or 18"
6. Base Weight .... 180grams
7. Total Weight ... 210grams
8. Impedance ...... 50Ω
9. Tuning ......... Factory preset
10. Frequency ...... GSM / 3G
11. Gain ........... 6.0dBi
12. Gain Receive ... 4.5dBi
13. VSWR ........... < 1.5:1 over 70MHz
14. Mounting ....... 1/2" UNF Stud
15. Cable .......... 3.6Mtrs RG58 celfoil
16. Connector ...... FME Female

RF925FW

The RF925FW is a dipole antenna commonly known as a "Raised Feed", this antenna is the most popular of all phone antennas due to its high gain and short length. The RF925FW is strong, almost indestructible as it has no soldered internals that can break but rather is modular made up of parts that fit together and all are replaceable.

The RF925FW has a solid chrome plated 1/4 wave tube that is its own tuned ground plane so it is not needed to be earthed in any way and it also allows the antenna to be placed in almost any location.

The RF925FW has 3.6 metres of best quality high frequency double sheilded Celfoil coax enough to mount in any location on any vehicle, and is terminated with a FME female connector that in turn connects to all available patch leads for your individual phone.

The antenna top of the RF925FW is a M922 which is a 5mm thick solid fibreglass colinear which is far thicker and stronger than many similar antennas and is available in Black, or White

Note - It is not recommended that you use antenna tops other than mentioned Mobile One brands

Pros - Short light antenna - 6dBi Gain, exceptionally broadband 90MHz SWR <1.5:1, excellent for mirror mounts on trucks
Cons - None that I could think of.

Recommended Accessories - BMS, Z Bracket OK

Low profile fibreglass GSM/3G antenna with stainless steel spring, 3.6mtrs of special low loss Cellfoil coax & FME connector, The MINIGSM is available in black or white and is suitable for all kinds of vehicles and for the marine environment.

Recommended Accessories - BMS

Look-alike Companion Antenna for UHF CB "CL473S"

Fibreglass GSM/3G antenna with stainless steel spring, 3.6mtrs of special low loss Cellfoil coax & FME connector, The MAXIGSM is available in black or white and is suitable for all kinds of vehicles and for the marine environment.

Recommended Accessories - BMS

This is the best all round antenna for any moving vehicle - OK for bull bar for petrol vehicles

Look-alike Companion Antenna for UHF CB"CL474S"

Fibreglass GSM/3G antenna with stainless steel heavy duty spring, 3.6mtrs of special low loss Cellfoil coax & FME connector. Available in black or white and is suitable for all vehicles and for marine environment.

This is the best all round antenna for any moving vehicle - Best choice for bull bar - especially diesel vehicles

Look-alike Companion Antenna for UHF CB "SS474"

3.6mtr long celfoil cable with female FME connectors each end to suit SAMN Plug & Play base (CN Range)

Heavy duty antenna mount with FME side connection and a N connector female top to suit phone antennas (CN Range)

Fibreglass GSM/3G antenna with stainless steel heavy duty spring, removable from base
Available in black or white and is suitable for all vehicles and for marine environment.

Look-alike Companion Antenna for UHF CB "CP474S"

Fibreglass GSM/3G antenna kit including SAMN base and cable assembly, removable from base
Available in black or white and is suitable for all vehicles and for marine environment.

Look-alike Companion Antenna for UHF CB "CP474SAMPK"

Fibreglass GSM/3G antenna with stainless steel heavy duty spring, removable from base
Available in black or white and is suitable for all vehicles and for marine environment.

Look-alike Companion Antenna for UHF CB "CP476S"

Fibreglass GSM/3G antenna kit including SAMN base and cable assembly, removable from base
Available in black or white and is suitable for all vehicles and for marine environment.

Look-alike Companion Antenna for UHF CB "CP476SAMPK"

This antenna is made specially for the GSM (Optus/Vodaphone) network, it has a stainless steel heavy duty spring, removable from base, it is vailable in black or white and is suitable for all vehicles

Special Note - This antenna is made specially for the GSM (Optus/Vodaphone) network, It has an aluminium base spring so it is recommended to mount on bull bars .

Special 1/2 Price only white no black

Fibreglass GSM/3G antenna with stainless steel spring, 10mtrs of special low loss Cellfoil coax & FME connector.
The MEGAGSM has a high gain and a low angle of radiation so it is not recommended as a mobile antenna unless the terrain traveled is flat and the antenna is mounted high on the vehicle, The MEGAGSM is available in black or white and is a excellent choice for a base station antenna.

Fibreglass Base station GSM/3G antenna with 20mm aluminium tube mounting section, 10mtrs of special low loss celfoil coax & FME connector. The COL923 is available in black or white and with any length of cable and connector.
The COL923 is the best base antenna for GSM/3G operation and works best when mounted as high as possible with the shortest possible length of cable.