Bases, Cables, Mounts & Accessories.
All Mobile One Bases and Cables are made with Australian PVC Moulding, Australian Fittings, Australian Springs, Made in Australia
Antenna Base Cable's
Suit UHF CB Antennas Suit antennas From 3MHz to 900MHz |
Suit UHF CB Antennas Suit antennas From 3MHz to 900MHz. |
| M1 Code | Description | Price A$ | M1 Code | Description | Price A$ |
|---|---|---|---|---|---|
| UL12C | UHF Base with 3.6mtrs coax and a PL259 Connector Connector attached to coax |
$35.00 Order Here or phone 02-4655-6677 |
UL12 / C | UHF Base with 3.7mtrs coax and a PL259 Connector "Supplied" Connector Not attached to coax |
$35.00 Order Here or phone 02-4655-6677 |
| Code Length Price UL12C 4.0m $36.00 UL17C 5.0m $37.00 UL24C 7.3m $39.00 Available with Any Length any Connector |
Code Length Price UL12/C 4.0m $36.00 UL17/C 5.0m $37.00 UL24/C 7.3m $39.00 Available with Any Length any Connector |
||||
Suit Scanners & Hand Held Radios Suit antennas From 3MHz to 900MHz |
Suit UHF CB Antennas Suit antennas From 3MHz to 900MHz. |
| M1 Code | Description | Price A$ | M1 Code | Description | Price A$ |
|---|---|---|---|---|---|
| UL12BNC | UHF Base with 3.6mtrs coax and a BNC Male Connector Connector attached to coax |
$35.00 Order Here or phone 02-4655-6677 |
SOC12C | SO239 UHF Base with 3.6mtrs coax and a PL259 Connector Connector attached to coax |
$40.00 Order Here or phone 02-4655-6677 |
| Code Length Price UL12C 3.6m $35.00 UL24C 7.3m $39.00 Available with Any Length any Connector |
Code Length Price SOC12C 3.6m $40.00 SOC24C 7.3m $44.00 Available with Any Length any Connector |
||||
|
Suit 27MHz AM Radios Suit antennas From 3MHz to 900MHz |
Suit Broadcast AM/FM Antennas Suit antennas From 1MHz to 110MHz. |
| M1 Code | Description | Price A$ | M1 Code | Description | Price A$ |
|---|---|---|---|---|---|
| A12C | HF/VHF Base with 3.6mtrs coax and a PL259 Connector Connector attached to coax |
$25.00 Order Here or phone 02-4655-6677 |
APN16 | For AM/FM antennas Suit all car radios 5/16" Base & cable with a PN57 Auto Plug |
$30.00 Order Here or phone 02-4655-6677 |
| Code Length Price A24C 7.3m $33.00 A36C 11m $40.00 Available with Any Length any Connector |
Code Length Price APN3 3.0m $33.00 APN36 3.6m $34.00 APN4 4.0m $35.00 APN45 4.5m $38.00 APN5 5.0m $40.00 Available with Any Length |
||||
|
Suit 27MHz AM Radios Suit antennas From 3MHz to 900MHz |
Suit Broadcast AM/FM Antennas Suit antennas From 1MHz to 110MHz. |
| M1 Code | Description | Price A$ | M1 Code | Description | Price A$ |
|---|---|---|---|---|---|
| C12C | RG58CU coax with a Pl259 connector Suit UHF CB Antennas. Extension Lead |
$20.00 Order Here or phone 02-4655-6677 |
DM12CK | Dipole Base & RG58CU Coax with a double 5/16" Base to suit two antennas one top one bottom plus a pl259 connector Suit antennas 3MHz to 600MHz. |
$35.00 Order Here or phone 02-4655-6677 |
| Code Length Price C13C 4.0m $20.00 C17C 5.0m $22.00 C24C 7.3m $33.00 C33C 10.0m $40.00 C36C 11.0m $40.00 Available with Any Length any Connector |
Code Length Price DM17CK 5.0m $37.00 DM36CK 11.0m $47.00 Available with Any Length any Connector |
||||
 |
 |
 |
| M1 Code | Price A$ | M1 Code | Price A$ | M1 Code | Price A$ |
|---|---|---|---|---|---|
| MAG12C | $57.00 Order Here or phone 02-4655-6677 |
MAG12BNC | $57.00 Order Here or phone 02-4655-6677 |
MHRB12SOC | $75.00 Order Here or phone 02-4655-6677 |
| Antenna Base & cable RG58CU 3.6m long with 5/16" magnet base & pl259 connector. Suit antennas TX 3MHz~600MHz & RX 3MHz ~ 1.3gHz. Note: The diameter of the Magnetic base is 90mm |
Antenna Base & cable RG58CU 3.6m long with 5/16" magnet base & BNC connector. Suit antennas TX 3MHz~600MHz & RX 3MHz ~ 1.3gHz. Note: The diameter of the Magnetic base is 90mm |
Antenna Base & cable RG58CU 3.6m long with SO239 magnet base & pl259 connector. Suit antennas TX 3MHz~600MHz & RX 3MHz ~ 1.3gHz. Note: The diameter of the Magnetic base is 90mm |
|||
| Magnet Mounts are not always a good choice for vehicles They May Scratch Paint work if you are not careful! All the above cables are available in any length or any connector required - please ask |
|||||
Antenna Mounts
 |
 |
 |
| M1 Code | Price A$ | M1 Code | Price A$ | M1 Code | Price A$ |
|---|---|---|---|---|---|
| BASEA | $17.50 Order Here or phone 02-4655-6677 |
BASEUL | $20.00 Order Here or phone 02-4655-6677 |
BASEBSS | $25.00 Order Here or phone 02-4655-6677 |
| Light duty antenna base 5/16" For antennas from 500kHz to 110MHz |
Light duty antenna base 5/16" For antennas from 25MHz to 600MHz |
Heavy duty antenna base 5/16" For antennas from 500kHz to 60MHz |
|||
 |
 |
 |
| M1 Code | Price A$ | M1 Code | Price A$ | M1 Code | Price A$ |
|---|---|---|---|---|---|
| SAM | $50.00 Order Here or phone 02-4655-6677 |
SAM2S | $50.00 Order Here or phone 02-4655-6677 |
SAMN | $50.00 Order Here or phone 02-4655-6677 |
| Heavy duty antenna mount with PL259 side connector to suit 1/2" antennas. For Antennas 3MHz to 100MHz | Heavy duty antenna mount with SO239 top & PL259 side connection to suit the "CP" Range antennas, For antennas 3MHz to 600MHz | Heavy duty antenna mount with N Connector top & FME side connector to suit "CN" Range phone antennas For antennas 3MHz to 3gHz | |||
 BMB Side (showing rubber feet) |
 BMB Underside (showing grubs screws) |
 BMB on Car (approx 7 Years No Damage at all) |
Boot Mount Stainless - Cat# (BMS) Polished Stainless Steel |
$35.00 Order Here or phone 02-4655-6677 |
The BMB or BMS is the best choice when mounting a monopole style antenna to a vehicle as it mounts the antenna very close to the ground plane ensuring the very best SWR and radiation pattern, this is especially important with regards to UHF antennas such as S474, M474, M476 etc as mounting these antennas onto z brackets can cause a poor SWR due to the raising of the antenna too high over the bonnet. 1. The Stainless steel boot mount polished (BMS) or powder coated black (BMB) will suit most vehicles boot and hoods 2. The Mobile One BMB is strong and efficient, simple to use, Secure, no drilling holes and quick to remove with an allen key The very BEST Bonnet & Boot mount ever!Cons - Watch out for the angle of your bonnet or boot, It may be a too greater angle! - Note the picture far right |
Antenna Springs
 |
 |
 Currently Out Of Stock |
 |
| M1 Code | Price A$ | M1 Code | Price A$ | M1 Code | Price A$ | M1 Code | Price A$ |
|---|---|---|---|---|---|---|---|
| SAL | $30.00 Order Here or phone 02-4655-6677 |
SAO | $35.00 Order Here or phone 02-4655-6677 |
SSS | $50.00 Order Here or phone 02-4655-6677 |
SAR | $40.00 Order Here or phone 02-4655-6677 |
| A light duty spring for 5/16" Antenna Mounts (27MHz CB, Amateur Band, Air Band etc) |
A heavy duty spring for 5/16" Antenna Mounts (27MHz CB, Amateur Band, Air Band etc) |
A heavy duty spring for 1/2 " Antenna Mounts (HF, 27MHz CB, Amateur Band, etc) |
A light duty spring for Raised feed antennas 1/2" thread on top suit RF470 Raised feeds |
||||
| All Antenna Springs Are Stainless Steel Warning - Don't use a spring under a UHF Monopole antenna UHF monopole antennas are FDW470, S474, M474, M476 etc |
|||||||
Antenna Adapters & Gender Changers
 MSCOL Monster Spring (no longer available) with the UNI2S antenna adapter |
 UNI2S$33.00 Order Here or phone 02-4655-6677 The UNI2S is a SO239 to SO239 adapter that allows you to put any antenna that has a PL259 base onto a Monster Spring or allows you to connect together two cables with PL259 connectors. Suitable for frequencies from 2MHz to 500MHz Suits CP474, CP476, or similar Antennas |
 |
 |
 |
 |
| M1 Code | Price A$ | M1 Code | Price A$ | M1 Code | Price A$ | M1 Code | Price A$ |
|---|---|---|---|---|---|---|---|
| FA | $8.50 Order Here or phone 02-4655-6677 |
MA | $5.00 Order Here or phone 02-4655-6677 |
FAS | $15.00 Order Here or phone 02-4655-6677 |
RAS | $25.00 Order Here or phone 02-4655-6677 |
| Adapter to change 5/16" male to 3/8" female (for Japanese antennas on Australian bases) | Adapter to change 3/8 " female to 5/16 " male (for Japanese bases to accept Australian antennas) | Adapter to change 3/8" male to 5/16" male (for Japanese bases to accept Australian antennas) | Adapter to change 1/2" male to 5/16" male, allows you to put 5/16" antennas on a "SAM" base | ||||
Solder Type Connectors & Adapters
 |
 |
 |
| M1 Code | Price A$ | M1 Code | Price A$ | M1 Code | Price A$ |
|---|---|---|---|---|---|
| SOC | $ASK Order Here or phone 02-4655-6677 |
PL259 | $5.00 Order Here or phone 02-4655-6677 |
PLA | $15.00 Order Here or phone 02-4655-6677 |
| SOC solder type connector to suit RG58 50 Ohm coax cable | PL259 solder type connector to suit RG58 50 Ohm coax cable |
Adapter to change SO239 to 5/16" standard antenna thread | |||
Crimp Type Connectors
(you will need a crimping tool)
 |
 |
 |
| M1 Code | Price A$ | M1 Code | Price A$ | M1 Code | Price A$ |
|---|---|---|---|---|---|
| BNC-M58 | $5.00 Order Here or phone 02-4655-6677 |
TNC-M58 | $5.00 Order Here or phone 02-4655-6677 |
SMA-M58 | $ASK Order Here or phone 02-4655-6677 |
| BNC Male crimp type connector to suit RG58 50 Ohm coax cable |
TNC Male crimp type connector to suit RG58 50 Ohm coax cable |
SMA Male crimp type connector to suit RG58 50 Ohm coax cable |
|||
Copyright © 2011 by Pride Industries. Web site & artwork created by Peter Pride.