AM/FM Broadcast Band Antennas

Antenna receiving AM & Shortwave frequencies only i.e.: 525kHz to 25MHz (Antenna Only), The M1W can be cut to what ever length that is required but it is important to note that the longer the antenna the better the performance.

Pros  - Combined with the APN16 , this is the best performing AM antenna on the market.
Cons - It is long.

Recommended Accessories - APN16 cable with BMS bonnet mount, SAO spring.

Antenna receiving AM & Shortwave frequencies only i.e.: 525kHz to 25MHz with APN16 Base & RG62 Cable 1.6m long, The M1W can be cut to what ever length that is required but it is important to note that the longer the antenna the better the performance.

Pros  - This is the best performing AM antenna on the market.
Cons - It is long.

Recommended Accessories - BMS bonnet mount, SAO spring
Note - The cable is available in 1.6m, 3m, 3.6m, 4m & 5m stock lengths.

Antenna receiving AM & FM frequencies of AM 525kHz to 1.6MHz and FM 88 to 108 MHz providing 2dBi Gain on FM.
Pros  - Combined with the APN16 , this is the best performing AM/FM antenna on the market.
Cons - It is long.
Recommended Accessories - APN16 with BMS, SAO spring

Antenna receiving AM & FM frequencies of AM 525kHz to 1.6MHz and FM 88 to 108 MHz.

Pros - Perfect length for bonnet and bull bar mounting (shopping centre parking etc).
Cons - It is long.
Recommended Accessories - APN16 with BMS, SAO spring.

Antenna receiving AM & FM frequencies of AM 525kHz to 1.6MHz and FM 88 to 108 MHz.

Pros - Perfect length for bonnet and bull bar mounting (shopping centre parking etc).
Cons - It is long.
Recommended Accessories - APN16 with BMS, SAO spring.

Antenna receiving AM & FM frequencies of AM 525kHz to 1.6MHz and FM 88 to 108 MHz.

Pros  - Excellent performing short antenna suitable for all mounting positions on vehicles.
Cons - None that I could think of.
Recommended Accessories - APN16 with BMS, SAL spring.

Antenna receiving AM & FM frequencies of AM 525kHz to 1.6MHz and FM 88 to 108 MHz. (Antenna Only)

Pros  - Good performing very short antenna suitable for all mounting positions on vehicles.
Cons - Performance is limited due to very short length, Originally designed for Trains, Buses etc.
Recommended Accessories - APN16 with BMS, SAL spring.

Antenna receiving AM & FM frequencies of AM 525kHz to 1.6MHz and FM 88 to 108 MHz.

Pros  - Excellent performing short antenna suitable for all mounting positions on vehicles.
Cons - Thin flexible not as strong as M3WT.
Recommended Accessories - APN16 with BMS, SAL spring

Antenna receiving AM & FM frequencies of AM 525kHz to 1.6MHz and FM 88 to 108 MHz.

Pros  - Thick heavy duty, very short antenna suitable for all mounting positions on vehicles.
Cons - Performance is limited due to very short length, Originally designed for Trains, Buses etc.
Recommended Accessories - APN16 with BMS, SAL spring.

Antenna receiving AM & FM frequencies of AM 525kHz to 1.6MHz and FM 88 to 108 MHz providing 2dB Gain on FM.
The M2p is supplied with a APN16 Base & 1.6m long RG62 coax and plug.

Pros  - Combined with the APN16 , this is the best performing AM/FM antenna on the market.
Cons - It is long.

Recommended Accessories - BMS bonnet mount, SAO spring.
Note - The cable is available in 1.6m, 3m, 3.6m, 4m & 5m stock lengths.

Antenna receiving AM & FM frequencies of AM 525kHz to 1.6MHz and FM 88 to 108 MHz.
The M5p is supplied with a APN16 Base & 1.6m long RG62 coax and plug.

Pros  - Perfect length for bonnet and bull bar mounting (shopping centre parking etc).
Cons - It is long.

Recommended Accessories - BMS bonnet mount, SAO spring
Note - The cable is available in 1.6m, 3m, 3.6m, 4m & 5m stock lengths.

Antenna receiving AM & FM frequencies of AM 525kHz to 1.6MHz and FM 88 to 108 MHz.

The M3WT is the same length as the M3W but much thicker and stronger.

Pros  - Excellent performing short antenna suitable for all mounting positions on vehicles.
Cons - None that I could think of.

Recommended Accessories - APN16 with BMS, SAL spring
Note - The cable is available in 1.6m, 3m, 3.6m, 4m & 5m stock lengths

Antenna receiving AM & FM frequencies of AM 525kHz to 1.6MHz and FM 88 to 108 MHz.

Pros  - Good performing very short antenna suitable for all mounting positions on vehicles.
Cons - Performance is limited due to short length.

Recommended Accessories - BMS bonnet mount, SAL spring.
Note - The cable is available in 1.6m, 3m, 3.6m, 4m & 5m stock lengths.

Antenna receiving AM & FM frequencies of AM 525kHz to 1.6MHz and FM 88 to 108 MHz.

Pros  - Excellent performing short antenna suitable for all mounting positions on vehicles.
Cons - Thin flexible not as strong as M3WT.

Recommended Accessories - BMS bonnet mount, SAL spring
Note - The cable is available in 1.6m, 3m, 3.6m, 4m & 5m stock lengths.

Antenna receiving AM & FM frequencies of AM 525kHz to 1.6MHz and FM 88 to 108 MHz.

Pros  - Thick heavy duty, very short antenna suitable for all mounting positions on vehicles.
Cons - Performance is limited due to very short length.

Recommended Accessories - BMS bonnet mount, SAL spring.
Note - The cable is available in 1.6m, 3m, 3.6m, 4m & 5m stock lengths.

Specifications

1. Order Code ... SAN206W (White)
   Order Code ... SAN206B (Black)
2. Type ......... 1/2 Wave
3. Gain ......... 3dBi Both Radio & TV
4. Pattern ...... Omnidirectional
5. Length ....... 950mm or 38"
6. Weight ....... 220grams
7. Impedance .... 75Ω
8. Tuning ....... Factory preset
9. Frequency .... Radio DAB+ 195MHz~220MHz
10. Frequency .... VHFTV 69MHz~220MHz
11. Frequency .... UHFTV 510MHz~550MHz
12. Frequency .... FM Radio 88MHz ~ 108MHz
13. Mounting ..... 1/2" Stainless Steel Bolt
14. Cable ........ 3.6mtrs RG59 75Ω Coax
15. Connector .... Not Supplied - ASK

SAN206

This antenna is the best choice for a standard digital radio or tv that has the standard tv type push in plug.

The SAN206 is a 1/2 wave, 3dBi gain, ground independent, 75Ω impedance antenna that is designed specially for both Digital TV and Digital Radio, It has a stainless steel spring in a black nylon base with a 1/2" mounting section. The SAN206 is suitable for mounting almost anywhere on a vehicle and is available in white Cat# "SAN206W" or black CAT# "SAN206B" or with various length cable and various connectors.

Pros - Short antenna suitable for all mounting positions on vehicles
Cons - You will need to cut the coax to your required length and install a tv plug ( $2 Shop or Bunnings etc)

Note on Connectors - Mobile One can supply the SAN206 with either a F Connector or a BNCMALE connector. please note that the only connectors that fit on 75Ω coax are BNCMALE, F, or Belling & Lee TV Plug and not SMA.

Look-alike Companion Antenna for UHFCB = "CL474S"
Look-alike Companion Antenna for phone NextG Telstra "MAXICDMA"
Look-alike Companion Antenna for phone GSM Optus "MAXIGSM"

Recommended Accessories - BMS for mobile use, Z bracket ok .

Specialised Antenna
Please phone us for your requirements

Specifications

1. Order Code ... SAN206SW (White)
   Order Code ... SAN206SB (Black)
2. Type ......... 1/2 Wave
3. Gain ......... 3dBi Both Radio & TV
4. Pattern ...... Omnidirectional
5. Length ....... 950mm or 38"
6. Weight ....... 220grams
7. Impedance .... 50Ω
8. Tuning ....... Factory preset
9. Frequency .... Radio DAB+ 195MHz~220MHz
10. Frequency .... VHFTV 69MHz~220MHz
11. Frequency .... UHFTV 510MHz~550MHz
12. Frequency .... FM Radio 88MHz ~ 108MHz
13. Mounting ..... 1/2" Stainless Steel Bolt
14. Cable ........ 3.6mtrs RG58 50Ω Coax
15. Connector .... SMA Male Connector on coax

SAN206S

This antenna is the best choice for a digital radio or tv that has a screw in SMA connection ( tiny brass 6mm dia ).

The SAN206 is a 1/2 wave, 3dBi gain, ground independent, 50Ω impedance antenna that is designed specially for both Digital TV and Digital Radio, It has a stainless steel spring in a black nylon base with a 1/2" mounting section. The SAN206S is suitable for mounting almost anywhere on a vehicle and is available in white Cat# "SAN206SW" or black CAT# "SAN206SB" or with various length cable.

Pros - Short antenna suitable for all mounting positions on vehicles
Cons - None known

Look-alike Companion Antenna for UHFCB = "CL474S"
Look-alike Companion Antenna for phone NextG Telstra "MAXICDMA"
Look-alike Companion Antenna for phone GSM Optus "MAXIGSM"

Recommended Accessories - BMS for mobile use, Z bracket ok .

This is a specialised Antenna
Please phone us for your requirements

Specifications

1. Order Code ... SS206W (White)
   Order Code.... SS206B (Black)
2. Type ......... 1/2 Wave
3. Gain ......... 3dBi Both Radio & TV
4. Pattern ...... Omnidirectional
5. Length ....... 1250mm or 49"
6. Weight ....... 230grams
7. Impedance .... 75Ω
8. Tuning ....... Factory preset
9. Frequency..... Radio DAB+ 195MHz~220MHz
10. Frequency .... VHFTV 69MHz~220MHz
11. Frequency .... UHFTV 510MHz~550MHz
12. Frequency .... FM Radio 88MHz ~ 108MHz
13. Mounting ..... 1/2" Stainless Steel Bolt
14. Cable ........ 3.6mtrs RG59 75Ω Coax
15. Connector .... Not Supplied - ASK

SS206

This antenna is the best choice for a standard digital radio or tv that has the standard tv type push in plug.

The SS206 is a 1/2 wave, 3dBi gain, ground independent, 75Ω impedance antenna that is designed specially for both Digital TV and Digital Radio, It has a stainless steel spring in a black nylon base with a 1/2" mounting section. The SS206 is suitable for mounting on most bull bars on a vehicle and is available in white Cat# "SS206W" or black CAT# "SS206B" or with various length cable and various connectors.

Note Connectors - Mobile One can supply the SS206 with either a F Connector or a BNCMALE connector. please note that the only connectors that fit on 75Ω coax are BNCMALE, F, or RCA TV.

Pros - Short antenna suitable for all mounting positions on vehicles.
Cons - You will need to cut the coax to your required length and install a tv plug ( $2 Shop or Bunnings etc)

Lookalike Companion - UHFCB = "SS474"
Lookalike Companion = Phone NextG Telstra "SS822"
Lookalike Companion = Phone GSM Optus "SS922"

Specifically for Bull Bars

This is a specialised Antenna
Please phone us for your requirements

Specifications

1. Order Code ... SS206SW (White)
   Order Code ... SS206SB (Black)
2. Type ......... 1/2 Wave
3. Gain ......... 3dBi Both Radio & TV
4. Pattern ...... Omnidirectional
5. Length ....... 1250mm or 49"
6. Weight ....... 230grams
7. Impedance .... 50Ω
8. Tuning ....... Factory preset
9. Frequency .... Radio DAB+ 195MHz~220MHz
10. Frequency .... VHFTV 69MHz~220MHz
11. Frequency .... UHFTV 510MHz~550MHz
12. Frequency .... FM Radio 88MHz ~ 108MHz
13. Mounting ..... 1/2" Stainless Steel Bolt
14. Cable ........ 3.6mtrs RG58 50Ω Coax
15. Connector .... SMA Male Connector

SS206S

This antenna is the best choice for a digital radio or tv that has a screw in SMA connection ( tiny brass 6mm dia ).

The SS206S is a 1/2 wave, 3dBi gain, ground independent, 50Ω impedance antenna that is designed specially for both Digital TV and Digital Radio, It has a stainless steel spring in a black nylon base with a 1/2" mounting section. The SS206S is suitable for mounting on most bull bars and is available in white Cat# "SS206SW" or black CAT# "SS206SB" or with various length cable.

Pros - Short heavy duty antenna suitable for bull bar on vehicles.
Cons - None that I could think of.

Lookalike Companion - UHFCB = "SS474"
Lookalike Companion = Phone NextG Telstra "SS822"
Lookalike Companion = Phone GSM Optus "SS922"

Specifically for Bull Bars

This is a specialised Antenna
Please phone us for your requirements

M206P

This antenna is the best choice for a standard digital radio or tv that has the standard tv type push in plug.

The M206P is a 1/2 wave broadband antenna designed for both Digital Radio & Digital TV as a mobile antenna, It is covered with polyolefin for long lasting and heavy duty use. The M206P is supplied with the A4/75 base & cable assembly 3.6m long or let us know your requirements. The M206 can be supplied in most colours.

Note Connectors - Mobile One can supply the M206P with either a F Connector or a BNCMALE connector. please note that the only connectors that fit on 75Ω coax are BNCMALE, F, or RCA TV.

Pros - Short antenna suitable for all mounting positions on vehicles.
Cons - You will need to cut the coax to your required length and install a tv plug ( $2 Shop or Bunnings etc)

Recommended Accessories - BMS bonnet mount or mirror mount bracket and is ok for Z bracket.
Note: The use of a spring is not recommended with this antenna as it will reduce the performance.

Excellent for Mirror Mounts

This is a specialised Antenna
Please phone us for your requirements

M206SP

This antenna is the best choice for a digital radio or tv that has a screw in SMA connection ( tiny brass 6mm dia ).

The M206SP is a 1/2 wave broadband antenna designed for both Digital Radio & Digital TV as a mobile antenna, It is covered with polyolefin for long lasting and heavy duty use. The M206SP is supplied with the UL12SMA base & cable assembly 3.6m long or let us know your requirements. The M206SP can be supplied in most colours.

Recommended Accessories - BMS bonnet mount or mirror mount bracket and is ok for Z bracket.
Note: The use of a spring is not recommended with this antenna as it will reduce the performance.

Excellent for Mirror Mounts

This is a specialised Antenna
Please phone us for your requirements