All Other Antennas

If you are needing that special antenna that does not yet exist please phone us

All of the antennas below are made with Australian Fibreglass and fittings please support Australian Made

70MHz to 88MHz 150MHz to 210MHz 400MHz to 476MHz 530MHz to 2.4gHz 530MHz to 1090MHz 1090MHz to 2.4gHz

525kHz to 2MHz

(See Radio AM/FM Antennas Section)

2MHz to 25MHz

(See Ham Band antenna section for more ideas)

Mobile One Make shortwave & low frequency HF antennas on 6MHz, 8MHz, 10MHz etc, either with 5/16" or 1/2" fittings
but we don't make multi tap or multi frequency HF antennas. Please Ask.

26MHz to 27MHz

New Zealand HF CB Radio Band 26.330MHz to 26.770MHz

Code	DSE	Length	Description	Price
RDRMNZ	D4063	320mm 13"	Fibreglass former & Loading coil with flexible spring, top coated with black polyolefin. This antenna is factory tuned to 26.400MHz but is very narrow banded and will need fine tuning or testing Recommended Accessories - A12C, or UL12C with BMS or Mag12C Note: You can use a spring SAL or SAO but the antenna will need to be re-tuned on the spring.	$25.00 Order Here or phone 02-4655-6677

Code	DSE	Length	Description	Price
DX136FWN	D4061	910mm 36"	Fibreglass helical constant diameter 5mm thick with 5/16" fitting coated with PVC available in black. This antenna is factory tuned to 26.400MHz (may need fine tuning) Recommended Accessories - A12C, or UL12C with BMS or Mag12C, You can use a SAL or SAO spring.	$23.00 Order Here or phone 02-4655-6677

Code	DSE	Length	Description	Price
DX160CDN	D4060	1520mm 60"	Fibreglass helical constant diameter 6.5mm thick with 5/16" fitting coated with PVC available in black. This antenna is factory tuned to 26.400MHz and should not need any further tuning. Recommended Accessories - A12C, or UL12C with BMS or Mag12C , You can use a SAL or SAO spring.	$35.00 Order Here or phone 02-4655-6677

Code	Length	Description	Price
DX148ATN	1190mm 47"	Special made Long 1/4" thick constant tapped fibreglass antenna cut to tune but factory set to 27.125MHz with a 3/8" male fitting designed for American and Japanese bases Recommended Accessories - FA with A12C, or UL12C with BMS or Mag12C	$60.00 Order Here or phone 02-4655-6677

27MHz to 28MHz

(See Australian 27MHz HF CB Antennas)

Mobile One Make a huge range of CB antennas

28MHz to 29MHz marine

(see Marine antenna section)

Mobile One Make a range of antennas for marine frequencies

28MHz to 30MHz

(see Ham antenna section)

Mobile One Make a range of antennas for the 10m Ham Band
NOTE: Almost all 27MHz CB Antennas are available pre tuned for 10m band

30MHz to 69MHz

6m Ham band , Baby monitors, cordless phone & remote control systems

Code	Length	Description	Price
FH35	1220mm 48"	Fibreglass helical constant diameter 6.5mm thick with 5/16" fitting coated with PVC available in black or white This antenna style is available for any frequency from 30MHz to 41MHz state the tx frequency range you require Recommended Accessories - A12C, or UL12C with BMS or Mag12C, You can use a SAL or SAO spring.	$30.00 Order Here or phone 02-4655-6677

Code	Length	Description	Price
M6-1	1520mm 60"	Fibreglass 1/4 wave tapered from 6.5mm to 4mm with 5/16" fitting coated with polyolefin black or white This +antenna is tune able from 50MHz to 88MHz Recommended Accessories - A12C, or UL12C with BMS or Mag12C. Note: You can use a spring SAL or SAO but the antenna may need to be re-tuned on the spring	$45.00 Order Here or phone 02-4655-6677

Please note that any antenna seen on this page can be made to a particular frequency with almost any connector

70MHz to 88MHz

The antennas below are made for various frequencies ranging from 70MHz to 88MHz
when ordering simply state the desired frequency in the code e.g. "BNCVAR76" = 76MHz

BNCVAR70

Code	Length	Description	Price
BNCVAR70	350mm 14"	A 1/4 wave helical antenna with BNC connector, covered entirely with polyolefin rubber heatshrink. The BNCVAR70 has a specially made 1/4λ phosphor bronze helical coil tuned to produce an exceptionally broadband antenna Note: Also ideal for scanners that are mainly used on low band VHF.	$35.00 Order Here or phone 02-4655-6677

Code

Length

Description

Price

BNCVAR70

350mm
14"

A 1/4 wave helical antenna with BNC connector, covered entirely with polyolefin rubber heatshrink. The BNCVAR70 has a specially made 1/4λ phosphor bronze helical coil tuned to produce an exceptionally broadband antenna

Note: Also ideal for scanners that are mainly used on low band VHF.

$35.00
Order Here
or phone
02-4655-6677

SMAVAR70 for radios where the SMA antenna connector is extended from the case of the radio

Code	Length	Description	Price
SMAVAR70	350mm 14"	A 1/4 wave helical antenna with SMA connector designed especially for exposed SMA connectors on hand held radios and covered entirely with polyolefin rubber heatshrink. The SMAVAR70 has a specially made 1/4λ phosphor bronze helical coil tuned to produce an exceptionally broadband antenna Note: The SMAVAR70 has a diameter of 12mm at its base and may not fit some radios that have the SMA connector recessed into the radio, if this is the case then the SMAIVAR70 is the better choice.	$45.00 Order Here or phone 02-4655-6677

SMAIVAR70 for radios where the SMA antenna connector is recessed into the case of the radio

Code

Length

Description

Price

SMAIVAR70

350mm
14"

A 1/4 wave helical antenna with SMA connector designed especially for recessed SMA connectors on hand held radios and covered entirely with polyolefin rubber heatshrink.

The SMAIVAR70 has a specially made 1/4λ phosphor bronze helical coil tuned to produce an exceptionally broadband antenna

Note: The SMAIVAR70 will fit all hand held radios and scanners that have a SMA connection.

$45.00
Order Here
or phone
02-4655-6677

Specifications

Order Code .. RDRM - State frequency
Type ........ 1/4 Wave
Pattern ..... Omnidirectional
Length ...... 290mm to 330mm
Weight ...... 70grams
Impedance ... 50Ω
Tuning ...... Factory preset
Frequency ... 68MHz~88MHz State freq
Mounting .... 5/16" 26tpi female

RDRM

For 68MHz to 88MHz State frequency e.g. "RDRM78"

The RDRM is the shortest antenna that can be made to suit frequencies from 68MHz to 88MHz
it has a bandwidth of up to 2MHz with a SWR <1.5:1 when mounted onto a suitable ground plane area, this represents 1MHz on either side of the desired transmit frequency, the receive frequency is not important.
The RDRMVAR is made with weather resistant materials and covered with polyolofin rubber.

Pros - Short antenna - suitable for all mounting positions on vehicles
Cons - Performance reduced due to it being a very short antenna

Recommended Accessories - UL12C with BMS or Mag12C , Z Bracket is not recommended

Note: You can use a spring SAL or SAO but the antenna will need to be re-tuned on the spring

Price = $40.00 Order Here or phone 02-4655-6677

Code	Length	Description	Price
SW1	980mm 39"	Stainless steel 1/4 wave 3mm thick constant diameter with 5/16" fitting This antenna is tunable from 69MHz to 88MHz and can be supplied tuned to the frequency required Recommended Accessories - A12C, or UL12C with BMS or Mag12C. Note: You can use a spring SAL or SAO but the antenna will need to be re-tuned on the spring	$35.00 Order Here or phone 02-4655-6677

Code	Length	Description	Price
M70-1	960mm 38"	Fibreglass 1/4 wave 5mm thick constant diameter with 5/16" fitting coated with PVC black or white This antenna is tunable from 69MHz to 88MHz and can be supplied tuned to the frequency required Recommended Accessories - A12C, or UL12C with BMS or Mag12C. Note: You can use a spring SAL or SAO but the antenna will need to be re-tuned on the spring	$30.00 Order Here or phone 02-4655-6677

Code	Length	Gain	Description	Price
M70-2	1520mm 60"	2dBi	Fibreglass 1/2 wave tapered from 6.5mm to 4mm with 5/16" fitting coated with PVC black This antenna is tunable from 69MHz and can be supplied tuned to the frequency required Recommended Accessories - A12C, or UL12C with BMS or Mag12C. Note: You can use a spring SAL or SAO but the antenna will need to be re-tuned on the spring	$30.00 Order Here or phone 02-4655-6677

88MHz to 108MHz

(see Broadcast antenna section)

Mobile One make a large range of FM radio antennas

108MHz to 136MHz

(see Air band antenna section)

Mobile One make a large range of air band antennas

136MHz to 149MHz

(see Amateur Bands section)

Mobile One make a large range of Ham Band antennas

150MHz to 155MHz

VHF HI Band Commercial + Digital Radio & TV Frequencies

The antennas below are made for various frequencies ranging from 150MHz to 175MHz
when ordering simply state the desired frequency in the code e.g. "BNCVAR151" = 151MHz

BNCVAR150

Code	Length	Description	Price
BNCVAR150	210mm 8"	A 1/4 wave helical antenna with BNC connector, covered entirely with polyolefin rubber heatshrink The BNCVAR150 has a specially made 1/4λ phosphor bronze helical coil tuned to produce an exceptionally broadband antenna Note: Also ideal for scanners that are mainly used on high band VHF	$35.00 Order Here or phone 02-4655-6677

Code

Length

Description

Price

BNCVAR150

210mm
8"

A 1/4 wave helical antenna with BNC connector, covered entirely with polyolefin rubber heatshrink

The BNCVAR150 has a specially made 1/4λ phosphor bronze helical coil tuned to produce an exceptionally broadband antenna

Note: Also ideal for scanners that are mainly used on high band VHF

$35.00
Order Here
or phone
02-4655-6677

SMAVAR150 for radios where the SMA antenna connector is extended from the case of the radio

Code

Length

Description

Price

SMAVAR150

210mm
8"

A 1/4 wave helical antenna with SMA connector designed especially for exposed SMA connectors on hand held radios and covered entirely with polyolefin rubber heatshrink.

The SMAVAR150 has a specially made 1/4λ phosphor bronze helical coil tuned to produce an exceptionally broadband antenna

Note: Also ideal for scanners that are mainly used on high band VHF
Note: The SMAVAR150 has a diameter of 12mm at its base and may not fit some radios that have the SMA connector recessed into the radio, if this is the case then the SMAIVAR150 is the better choice.

$45.00
Order Here
or phone
02-4655-6677

SMAIVAR150 for radios where the SMA antenna connector is recessed into the case of the radio

Code

Length

Description

Price

SMAIVAR150

210mm
8"

A 1/4 wave helical antenna with SMA connector designed especially for recessed SMA connectors on hand held radios and covered entirely with polyolefin rubber heatshrink.

The SMAIVAR150 has a specially made 1/4λ phosphor bronze helical coil tuned to produce an exceptionally broadband antenna

Note: Also ideal for scanners that are mainly used on high band VHF
Note: The SMAIVAR150 will fit all VHF hand held radios and scanners that have a SMA connection.

$45.00
Order Here
or phone
02-4655-6677

Specifications

Order Code .. RDRM - State frequency
Type ........ 1/4 Wave
Pattern ..... Omnidirectional
Length ...... 185mm
Weight ...... 60 Grams
Impedance ... 50Ω
Tuning ...... Factory preset
Frequency ... 149MHz~175MHz State freq
Mounting .... 5/16" 26tpi female

RDRM

For 149MHz to 180MHz State frequency e.g. "RDRM172"

The RDRM is the shortest antenna that can be made to suit frequencies from 149MHz to 175MHz it has a bandwidth of up to 6MHz with a SWR <1.5:1 when mounted onto a suitable ground plane area, this represents 3MHz on either side of the desired transmit frequency, the receive frequency is not important. The RDRM is made with weather resistant materials and covered with polyolofin rubber.

Price = $40.00 Order Here

Code	Length	Description	Price
SW2	630mm 25" Untuned	Stainless steel 1/4 wave 1.6mm thick constant diameter with 5/16" fitting This antenna is available for frequencies from 150MHz to 180MHz state the tx frequency range required Recommended Accessories - UL12C with BMS or Mag12C. Note: You can use a spring SAL or SAO but the antenna will need to be re-tuned on the spring	$30.00 Order Here or phone 02-4655-6677

Code	Length	Description	Price
M151-1	630mm 25" Untuned	Fibreglass 1/4 wave 5mm thick constant diameter with 5/16" fitting coated with PVC black or white This antenna is available for frequencies from 150MHz to 180MHz state the tx frequency range required Recommended Accessories - UL12C with BMS or Mag12C. Note: You can use a spring SAL or SAO but the antenna will need to be re-tuned on the spring	$40.00 Order Here or phone 02-4655-6677

Code	Length	Gain	Description	Price
M151-2	780mm 31"	2dBi	Fibreglass 1/2wave 4.5mm thick constant diameter with 5/16" fitting coated with PVC black This antenna is available for frequencies from 150MHz to 180MHz state the tx frequency range required Recommended Accessories - UL12C with BMS or Mag12C. Note: You can use a spring SAL or SAO but the antenna will need to be re-tuned on the spring	$40.00 Order Here or phone 02-4655-6677

Code	Length	Gain	Description	Price
M151-3	1300mm 51"	3.3dBi	Fibreglass 5/8 wave tapered from 6.5mm to 4mm with 5/16" fitting coated with PVC black This antenna is available for frequencies from 150MHz to 180MHz state the tx frequency range required Recommended Accessories - UL12C with BMS or Mag12C. Note: You can use a spring SAL or SAO but the antenna will need to be re-tuned on the spring	$45.00 Order Here or phone 02-4655-6677

The antennas below are Ground Independent - not requiring a ground plane

Code	Length	Gain	Description	Price
SAN151	1200mm 47"	3dBi	Hollow fibreglass 1/2 wave ground independent with a stainless steel spring that has a 1/2" mounting This antenna is available in white or black and with any configuration of coax and connectors. This antenna is also made for frequencies that range from 120MHz to 210MHz Recommended Accessories - BMS	ASK Order Here or phone 02-4655-6677

Code	Length	Gain	Description	Price
CPS151	1230mm 48"	3dBi	Hollow fibreglass 1/2 wave ground independent with a heavy duty stainless steel spring incorporating a quick disconnect male PL259 base to suit any SO239 fitting such as the mobile one SAM2S or SOC12C mounts and is available in black or white. This antenna is also made for frequencies that range from 120MHz to 210MHz Recommended Accessories - SAM2s with BMS or SOC12C with BMS	ASK Order Here or phone 02-4655-6677

Please note that any antenna seen on this page can be made to a particular frequency with almost any connector

156MHz to 162MHz

(see Marine antenna section)

Mobile One make a range of VHF Marine radio antennas

163MHz to 180MHz

VHF HI Band Commercial

The antennas below are made for various frequencies ranging from 150MHz to 175MHz
when ordering simply state the desired tx frequency in the code e.g. "BNCVAR172" = 172MHz

BNCVAR150

Code

Length

Description

Price

BNCVAR160

210mm
8"

A 1/4 wave helical antenna with BNC connector, covered entirely with polyolefin rubber heatshrink

The BNCVAR160 has a specially made 1/4λ phosphor bronze helical coil tuned to produce an exceptionally broadband antenna

Note: Also ideal for scanners that are mainly used on high band VHF

$35.00
Order Here
or phone
02-4655-6677

SMAVAR160 for radios where the SMA antenna connector is extended from the case of the radio

Code

Length

Description

Price

SMAVAR160

210mm
8"

A 1/4 wave helical antenna with SMA connector designed especially for exposed SMA connectors on hand held radios and covered entirely with polyolefin rubber heatshrink.

The SMAVAR160 has a specially made 1/4λ phosphor bronze helical coil tuned to produce an exceptionally broadband antenna

Note: Also ideal for scanners that are mainly used on high band VHF
Note: The SMAVAR160 has a diameter of 12mm at its base and may not fit some radios that have the SMA connector recessed into the radio, if this is the case then the SMAIVAR160 is the better choice.

$45.00
Order Here
or phone
02-4655-6677

SMAIVAR160 for radios where the SMA antenna connector is recessed into the case of the radio

Code

Length

Description

Price

SMAIVAR160

210mm
8"

A 1/4 wave helical antenna with SMA connector designed especially for recessed SMA connectors on hand held radios and covered entirely with polyolefin rubber heatshrink.

The SMAIVAR160 has a specially made 1/4λ phosphor bronze helical coil tuned to produce an exceptionally broadband antenna

Note: Also ideal for scanners that are mainly used on high band VHF
Note: The SMAIVAR160 will fit all VHF hand held radios and scanners that have a SMA connection.

$45.00
Order Here
or phone
02-4655-6677

Specifications

Order Code .. RDRM - State frequency
Type ........ 1/4 Wave
Pattern ..... Omnidirectional
Length ...... 185mm
Weight ...... 60 Grams
Impedance ... 50Ω
Tuning ...... Factory preset
Frequency ... 149MHz~180MHz State freq
Mounting .... 5/16" 26tpi female

RDRM

For 149MHz to 180MHz State frequency e.g. "RDRM172"

The RDRMHI is the shortest antenna that can be made to suit frequencies from 149MHz to 175MHz it has a bandwidth of up to 6MHz with a SWR <1.5:1 when mounted onto a suitable ground plane area, this represents 3MHz on either side of the desired transmit frequency, the receive frequency is not important.

The RDRM is covered with polyolofin and is available in Black, White, RED, GREEN, BLUE or YELLOW and Orange

Pros - Short antenna - suitable for all mounting positions on vehicles
Cons - Performance reduced due to it being a very short antenna

Recommended Accessories - UL12C with BMS or Mag12C , Z Bracket is not recommended

Note: You can use a spring SAL or SAO but the antenna will need to be re-tuned on the spring

Price = $40.00 Order Here

Code	Length	Description	Price
SW2	400mm 16"	Stainless steel 1/4 wave 1.6mm thick constant diameter with 5/16" fitting This antenna is available for frequencies from 150MHz to 180MHz state the tx frequency range required Recommended Accessories - UL12C with BMS or Mag12C. Note: You can use a spring SAL or SAO but the antenna will need to be re-tuned on the spring	$30.00 Order Here or phone 02-4655-6677

Code	Length	Description	Price
M172-1	400mm 16"	Fibreglass 1/4 wave 5mm thick constant diameter with 5/16" fitting coated with PVC black or white This antenna is available for frequencies from 150MHz to 180MHz state the tx frequency range required Recommended Accessories - UL12C with BMS or Mag12C. Note: You can use a spring SAL or SAO but the antenna will need to be re-tuned on the spring	$30.00 Order Here or phone 02-4655-6677

Code	Length	Gain	Description	Price
M172-2	730mm 29"	2.14dBi	Fibreglass 1/2wave 4.5mm thick constant diameter with 5/16" fitting coated with PVC black This antenna is available for frequencies from 150MHz to 180MHz state the tx frequency range required Recommended Accessories - UL12C with BMS or Mag12C. Note: You can use a spring SAL or SAO but the antenna will need to be re-tuned on the spring	$40.00 Order Here or phone 02-4655-6677

Code	Length	Gain	Description	Price
M172-3	1200mm 47"	3.3dBi	Fibreglass 5/8 wave tapered from 6.5mm to 4mm with 5/16" fitting coated with PVC black This antenna is available for frequencies from 150MHz to 180MHz state the tx frequency range required Recommended Accessories - UL12C with BMS or Mag12C. Note: You can use a spring SAL or SAO but the antenna will need to be re-tuned on the spring	$45.00 Order Here or phone 02-4655-6677

180MHz to 220MHz

Digital Radio DAB+ & Digital TV

(see Radio antenna section)

Mobile One make a range of VHF Marine radio antennas

Please note that any antenna seen on this page can be made to a particular frequency with almost any connector

400MHz to 476MHz UHF Commercial Bands

The antennas below are made for various frequencies ranging from 400MHz to 520MHz
when ordering simply state the desired tx frequency in the code e.g. "BNCHW460" = 460MHz

BNCMD477

Code	Length	Description	Price
BNCMD460	160mm 6"	BNC Connection, 1/4 wave antenna which is made with tough nylon tubing covered entirely with polyolefin for heavy duty use and weatherproof protection. This antenna is made primarily for hand held transceivers and has a very large bandwidth making it an excellent choice. The BNCMD460 is available in Black, White, RED, GREEN, BLUE or YELLOW and is also available with other connector types.	$35.00 Order Here or phone 02-4655-6677

BNCHW

TNCHW

PLHW

Code	Length	Gain	Description	Price
BNCHW460	350mm 14"	3dBi	Ground Independent 1/2 wave internals & tough nylon tubing covered with polyolefin heatshrink on a BNC The BNCHW has a bandwidth of 4Mhz < 1.5:1 SWR when tuned to the required frequency and is available on other frequencies from 400MHz to 2.4gHz, simply state the frequency required at the end of the code e.g.: BNCHW468	$40.00 Order Here or phone 02-4655-6677
TNCHW460	350mm 14"	3dBi	Ground Independent 1/2 wave internals & tough nylon tubing covered with polyolefin heatshrink on a TNC The TNCHW has a bandwidth of 4Mhz < 1.5:1 SWR when tuned to the required frequency and is available on other frequencies from 400MHz to 2.4gHz, simply state the frequency required at the end of the code e.g.: TNCHW468	$40.00 Order Here or phone 02-4655-6677
PLHW460	350mm 14"	3dBi	Ground Independent 1/2 wave internals & tough nylon tubing covered with polyolefin heatshrink on a PL259 The PLHW has a bandwidth of 4Mhz < 1.5:1 SWR when tuned to the required frequency and is available on other frequencies from 400MHz to 2.4gHz simply state the frequency required at the end of the code e.g.: PLHW460 Recommended Accessories - SOC12C on a BMS or MHRB12SOC	$50.00 Order Here or phone 02-4655-6677

FDW470

Code	Length	Description	Price
FDW410	154mm	Antenna UHF 1/4 Wave stainless steel wire rope and coated with rubber - 410MHz to 430MHz Recommended accessories - UL12BNC or UL12C with BMS or Mag12C Note: You can NOT use a spring with this antenna.	$15.00 Order Here or phone 02-4655-6677
FDW430	147mm	Antenna UHF 1/4 Wave stainless steel wire rope and coated with rubber - 430MHz to 450MHz Recommended accessories - UL12BNC or UL12C with BMS or Mag12C Note: You can NOT use a spring with this antenna.	$15.00 Order Here or phone 02-4655-6677
FDW450	140mm	Antenna UHF 1/4 Wave stainless steel wire rope and coated with rubber - 450MHz to 470MHz Recommended accessories - UL12BNC or UL12C with BMS or Mag12C Note: You can NOT use a spring with this antenna.	$15.00 Order Here or phone 02-4655-6677
FDW470	135mm	Antenna UHF 1/4 Wave stainless steel wire rope and coated with rubber - 470MHz to 490MHz Recommended accessories - UL12BNC or UL12C with BMS or Mag12C Note: You can NOT use a spring with this antenna.	$15.00 Order Here or phone 02-4655-6677
FDW490	130mm	Antenna UHF 1/4 Wave stainless steel wire rope and coated with rubber - 490MHz to 520MHz Recommended accessories - UL12BNC or UL12C with BMS or Mag12C Note: You can NOT use a spring with this antenna.	$15.00 Order Here or phone 02-4655-6677

Code	Frequency	Length	Description	Price
M410	410~420MHz	710mm	Antenna UHF collinear fibreglass covered with PVC 4.5dB gain Recommended Accessories - UL12BNC or UL12C with BMS or Mag12C Note: You can NOT use a spring with this antenna.	$35.00 Order Here or phone 02-4655-6677

Code	Frequency	Length	Description	Price
M430	430~440MHz	680mm 27"	Antenna UHF collinear fibreglass covered with PVC 4.5dB gain Recommended Accessories - UL12BNC or UL12C with BMS or Mag12C Note: You can NOT use a spring with this antenna.	$35.00 Order Here or phone 02-4655-6677

Code	Frequency	Length	Description	Price
M460	460~470MHz	640mm 25"	Antenna UHF collinear fibreglass covered with PVC 4.5dB gain Recommended Accessories - UL12BNC or UL12C with BMS or Mag12C Note: You can NOT use a spring with this antenna.	$35.00 Order Here or phone 02-4655-6677

Code	Frequency	Length	Gain	Description	Price
C420H	410~420MHz	350mm 14 "	3dBi	1/2 wave ground independent antenna with internal LC network plus 3.6m coax NOTE: This antenna has a usable bandwidth of 10MHz and is made for any frequency on the UHF band from 400MHz to 520MHz and with any length of coax and any type of connector that may be required. Recommended Accessories - BMS	ASK Order Here or phone 02-4655-6677

476MHz to 478MHz

(see UHF CB Band section)

Mobile One make such a large range of UHF antennas, it is simpler to direct you to the UHF CB section
most of the antennas made for 477MHz UHF CB are also available from 400MHz to 520MHz rf470fwss

530MHz to 800MHz

UHF TV and Digital TV Band

Mobile One has made many different antennas for Digital TV for Marine applications on various frequencies
and has designed antennas for NZ Marine and Digital TV - Please Inquire.

800MHz to 900MHz

Telstra NextG etc

(see NextG Phone section)

900MHz to 1090MHz

Optus / Vodaphone GSM
(see GSM Phone section)

1090MHz

1090MHz Mode-S / ADS-B

(see Airband section)

1000MHz to 2.4gHz

M1 Code	Length	Gain	Price A$	M1 Code	Length	Gain	Price A$
C1300H	200mm	3dBi	$75.00	K1300H4	220mm	3dBi	$135.00
Low profile ground independent 1/2 wave antenna with 7/16" fitting to suit a gutter mount, boot mount, Z bracket or similar, usually supplied with 3.6m coax plus a fme connector but can be supplied with any length of cable and with any connector. This antenna is available for any particular frequency and has 90MHz bandwidth <1.6:1 VSWR Recommended Accessories - BMS				Low profile ground independent 1/2 wave antenna on a magnet mount, usually supplied with 3.6m coax plus a fme connector but can be supplied with any length of cable and with any connector and is available for any particular frequency and has 90MHz bandwidth <1.6:1 VSWR

Please note that any antenna seen on this page can be made to a particular frequency with almost any connector

2.4gHz

M1 Code	Length	Gain	Price A$	M1 Code	Length	Gain	Price A$
C2400H	100mm	3dB	$75.00	K2400H4	100mm	3dB	$135.00
Low profile ground independent 1/2 wave antenna with 7/16"fitting to suit a gutter mount, boot mount, Z bracket or similar, usually supplied with 3.6m coax plus a fme connector but can be supplied with any length of cable and with any connector. This antenna is available for any particular frequency and has 130MHz bandwidth <1.6:1 VSWR Recommended Accessories - BMS				Low profile ground independent 1/2 wave antenna on a magnet mount, usually supplied with 3.6m coax plus a fme connector but can be supplied with any length of cable and with any connector and is available for any particular frequency and has 130MHz bandwidth <1.6:1 VSWR

3G/NextG Phone & Modem Antennas	3G/EDGE Phone & Modem Antennas	4G Phone & Modem Antennas	UHF CB Antennas	UHF CB Raised Feed Antennas	27 MHz HF CB Antennas	AM/FM Radio Antennas	Digital Radio & TV Antennas	Air-Band Antennas	Scanner Antennas

Mobile One Front Door	Contact Us	FAQ & Product Warranty	Product Outlets	Order Items Here	Flag Poles	Amateur-Bands Antennas	Marine-Bands Antennas	All Other Antennas by Frequency	Bases, Cables & Accesories

All Other Antennas

If you are needing that special antenna that does not yet exist please phone us

All of the antennas below are made with Australian Fibreglass and fittings please support Australian Made

525kHz to 2MHz

2MHz to 25MHz

(See Ham Band antenna section for more ideas)

26MHz to 27MHz

New Zealand HF CB Radio Band 26.330MHz to 26.770MHz

27MHz to 28MHz

28MHz to 29MHz marine

28MHz to 30MHz

30MHz to 69MHz

6m Ham band , Baby monitors, cordless phone & remote control systems

Please note that any antenna seen on this page can be made to a particular frequency with almost any connector

70MHz to 88MHz

The antennas below are made for various frequencies ranging from 70MHz to 88MHz when ordering simply state the desired frequency in the code e.g. "BNCVAR76" = 76MHz

SMAVAR70 for radios where the SMA antenna connector is extended from the case of the radio

SMAIVAR70 for radios where the SMA antenna connector is recessed into the case of the radio

Specifications

RDRM

For 68MHz to 88MHz State frequency e.g. "RDRM78"

88MHz to 108MHz

108MHz to 136MHz

136MHz to 149MHz

150MHz to 155MHz

VHF HI Band Commercial + Digital Radio & TV Frequencies

The antennas below are made for various frequencies ranging from 150MHz to 175MHz when ordering simply state the desired frequency in the code e.g. "BNCVAR151" = 151MHz

SMAVAR150 for radios where the SMA antenna connector is extended from the case of the radio

SMAIVAR150 for radios where the SMA antenna connector is recessed into the case of the radio

Specifications

RDRM

For 149MHz to 180MHz State frequency e.g. "RDRM172"

The antennas below are Ground Independent - not requiring a ground plane

Please note that any antenna seen on this page can be made to a particular frequency with almost any connector

156MHz to 162MHz

163MHz to 180MHz

VHF HI Band Commercial

The antennas below are made for various frequencies ranging from 150MHz to 175MHz when ordering simply state the desired tx frequency in the code e.g. "BNCVAR172" = 172MHz

SMAVAR160 for radios where the SMA antenna connector is extended from the case of the radio

SMAIVAR160 for radios where the SMA antenna connector is recessed into the case of the radio

Specifications

RDRM

For 149MHz to 180MHz State frequency e.g. "RDRM172"

180MHz to 220MHz

Digital Radio DAB+ & Digital TV

Please note that any antenna seen on this page can be made to a particular frequency with almost any connector

400MHz to 476MHz UHF Commercial Bands

The antennas below are made for various frequencies ranging from 400MHz to 520MHz when ordering simply state the desired tx frequency in the code e.g. "BNCHW460" = 460MHz

476MHz to 478MHz

530MHz to 800MHz

UHF TV and Digital TV Band

800MHz to 900MHz

Telstra NextG etc

900MHz to 1090MHz

Optus / Vodaphone GSM (see GSM Phone section)

1090MHz

1090MHz Mode-S / ADS-B

1000MHz to 2.4gHz

Please note that any antenna seen on this page can be made to a particular frequency with almost any connector

2.4gHz

If you cant find it? - we can probably make it!

AND THERES STILL LOTS MORE AUSTRALIAN MADE ANTENNAS AVAILABLE AT MOBILE ONE

The antennas below are made for various frequencies ranging from 70MHz to 88MHz
when ordering simply state the desired frequency in the code e.g. "BNCVAR76" = 76MHz

The antennas below are made for various frequencies ranging from 150MHz to 175MHz
when ordering simply state the desired frequency in the code e.g. "BNCVAR151" = 151MHz

The antennas below are made for various frequencies ranging from 150MHz to 175MHz
when ordering simply state the desired tx frequency in the code e.g. "BNCVAR172" = 172MHz

The antennas below are made for various frequencies ranging from 400MHz to 520MHz
when ordering simply state the desired tx frequency in the code e.g. "BNCHW460" = 460MHz

Optus / Vodaphone GSM
(see GSM Phone section)